Pass Labs XP-25 Outputs

I am currently trying out a Pass Labs XP-25 phono stage and enjoying what I am hearing, particularly with an MC Step Up Transformer feeding into it vice using the MC settings available.

I do have a question which I could not answer from reading the manual. As any XP-25 or 27 users will know it has a RCA and XLR output, with the RCA output being 6db less gain. The question Is, is it possible to have both outputs connected to a preamp RCA and XLR inputs accordingly and switch between them on your preamp (adjusting the volume of course) to see what you prefer?

Post removed 

@karl_desch I suppose it's horses for courses, I tried this with my friend also listening we both felt that putting it through the SUT gave it more tonal colour, body and musical engagement. Of course there are 3 variables in that yours is an XP-27, with a different SUT and cartridge. I would be interested to know you phono stage history as to how you arrived with the XP-27.

@benjie as stated before I don't have a gain/volume.

Keep in mind, your TVC linestage is a passive device. It adds no gain to the signal.  Most active linestages can add at least 10db or more of gain. So you are fully dependent upon phono stage gain.  Like benjie says, you need to up the gain setting on your Pass XP25.

@lewm as I have stated before gain/volume is not the issue, my question was can l use the XLR and RCA outputs simultaneously connected to my preamp.

Anyway people thanks for all your input and advice.

@alan60 , yes you can connect both the single ended and xlr outputs of the Xp-25 to your preamp (both outputs are live at the same time) BUT, most preamps will only let you select one input at a time, therefore, you can only toggle back and forth between rca  and xlr. Was that your question?