Perfect Path Tecnologies ‘The Gate’


Having been a music lover and audio enthusiast for more decades than I care to admit to I’ve had the privilege of owning some tremendous components over those years and thought I had attained a level of musical enjoyment that would be difficult to improve upon without spending more money than I could afford. Then along came The Gate to turn my audio conceptions on end. 

While I was quite skeptical of all of the positive proclamations regarding the Perfect Path mats, cards and contact enhancer ( how could they possibly bring about such sonic improvements?) I took the plunge and purchased a nano bundle to see what the hubbub was all about. Much to my surprise they not only brought about improvements to my systems’ ability to recreate a more musical sound but did so in spades. 

When Tim of Perfect Path Technologies asked if I wanted to try his new product, The Gate, I jumped at the chance thinking it would be a nice addition to what the other products provided. I wasn’t prepared for the quantum leap The Gate brought to my music listening pleasure. As much as the other products brought about a much lower noise floor, greater detail and delicacy, improved dynamics, richer tone and more realism The Gate does so in magnitudes difficult to describe. The best way I can describe its affect is unreal purity leading the most realistic musical sound I’ve had the pleasure of experiencing.....outside of a live performance obviously. It has me listening to all of my CD’s as if for the first time again.

I have no idea how The Gate actually works or what it does I just know it’s the most dramatic tweak to my system I’ve ever experienced and I wouldn’t think of being without it. As to how it’s implemented, it’s installed in the electrical panel with one lead connected to the common buss and the other to a breaker ( preferably 220). Hope I got the terminology correct.....I’m far from being an electrician!

At $4,999.00 it’s not cheap but worth every penny to me as I’ve spent more on components with less sonic improvement. 

Lastly, I realize some will scoff at something they can’t understand and I get not understanding it as I don’t, but I would hope people could keep their skepticism healthy and civil. I am not here to promote or sell, nor do I have any affiliation with PPT. I am only sharing something that I’ve found to be transforming in my system. Sorry for the lengthy introduction.
128x128mac48025
It appears The Gate is hooked up like any circuit breaker--it is piggybacked onto one. It could even be put in an empty breaker and is best placed on a 240V breaker, where it would serve both bus bars---correct me if I'm wrong on this. 
Correct jafreeman, it can either be piggybacked onto an existing breaker or put into an empty one and yes, putting into a 220 breaker is best. I initially hooked mine up to a 110 breaker and after switching it to a 220 I heard a noticeable improvement right away. 
Unless this company indicates the safety of their product as indicated in @folkfreak  posting, (did any of you look at them) proof of safety testing and operating voltages, anyone who installs one of these will be on their own if it takes their house down in a failure.  No insurance company will cover the loss.
^^^
Safety ...

This seems to be the same concern that was brought up in one of the SR fuse threads.

This morning, I went through all of the owner’s manuals for each piece of Audio Research Corporation electronics I own. While there were cautions printed on what to be aware of in terms of potential electrical shock, there wasn’t anything about "proof of safety testing and operating voltage."

I’ve kept all of the boxes and instructions that came along with the SR after-market fuses that have been installed in the system. In reading the instructions, there’s nothing about "proof of safety testing and operating voltage." of these fuses at the SR factory either.

Just out of curiosity, let’s all check the instructions that came with every tweak we have in our systems that are hooked up to either the equipment or the electrical circuit outside of the equipment and check for "proof of safety testing and operating voltage" claims made by the manufacturer.

Are any of us using any Bybee devices? How about after-market wall receptacles? Power Conditioners? What are the detrimental safety effects of all of Herbie’s tube dampeners I have throughout my system? Herbie certainly doesn’t say in the instructions that came with the dampeners. In fact, there aren’t any instructions at all that I can remember.

Come to think of it, my phono cartridge is in the circuit ... and these miscreants at the cartridge factory didn’t supply any "proof of safety testing and operating voltage" either.

While caution is encouraged in installing The Gate, it is a simple hookup consisting of two screws and two wires. If one doesn’t feel competent working in the breaker panel, then hiring an electrician would be the prudent thing to do.

Oh, and turning the power off while installing The Gate would be a wise thing to do also.

Most of us have after-market tweaks and devises that need to be checked out in the name of caution. Please read the owner’s manuals for "proof of safety testing and operating voltage" and report your findings here. Thanks.

The world is coming to an end...!!!

Frank
nutella
Unless this company indicates the safety of their product as indicated in @folkfreak  posting, (did any of you look at them) proof of safety testing and operating voltages, anyone who installs one of these will be on their own if it takes their house down in a failure. No insurance company will cover the loss.
My homeowner's insurance policy notes no such exclusion. Will you please cite the language in your policy that leads you to your belief?