power conditioning question gentlemen


      I,m considering a power conditioner /surge unit ,Two sunfire subs,nu vista intergrated(draws some juice) ,transport,dac,tt, phono section (dc-ac i may just plug in wall)  .Dedicated 20amp run directly to room x 2 hospital grade rec. I have been looking into richard grays,furman ref,shunyata etc.I have a unique set up here in nor cal.I am completley off grid!,I run a serious solar and res set up with a genny back up.The power is pretty consistant although during changes in genny start up or at time it does fluctuate a little .I never hear it or have never measured a spiked it drops slightly during those milliseconds.I would like to snag a used one in the 1k range .
thoughts??

128x128oleschool
Falconquest,i agree ,i do not feel like i am in need of "conditioning my power its generated 100’away and is very clean.I am interested in my novice terms. "a supply of water storage so when im using 1gallon a min and open a valve i can get 3 gallon instantly" as an example . That why i,m thinking torrodial my amp alone is 1200 watts . mark at core in the short time we spoke while i was driving offered an 1800w for 1500 retail he said its 60/60 reversed polarity something like that its out of my wheel house.My amp can produce 40amps peak output and i just feel like its sucking thru a straw sometimes when everything is rolling heavy , maybe in my mind .i would also like a surge protection of some kind .Does any of this make sense ? the future is alternative power ,so i am cutting edge lol ;)
My buddy has well into 6figure in a serious offgrid setup and he has dropped probly 10 k on furman ref units .I just don.t know if thats the key for me ...
opinions please
Furman's pro gear is very cost effective, and among the best surge protection you can buy if you get the line with series mode surge protection.

Richard Gray's is very expensive, but does a great job of cleaning up noise, however it's not a true surge/line protector. It's a resonant tank which does smooth out the power cycle to cycle, but won't really stop anything catastrophic.

Furman's home gear gets quite pricey.

If money is no object, and you never want to hear a bad power cycle I'd look at the Canadian PurePower, designed by the head of Jensen transformers, he knows his stuff really well.

http://partsconnexion.com/fin_prod_pp_main.html

Best,

Erik
    I have little fear of catasphophic failure .my system is only on when im listening.The furman ref is in my range i see them for a g used as the grays .but the core intrigues me because of the toroidial transformer .. surge may be an issue or even a ("under"  lack of power
surge lol) 
anyone ?
Oleschool-

Your power setup is unique. If that were my situation, a used PSA Power Plant can be found in your budget. I found a PPP for $700 and no complaints. If it dies, it can still be refreshed at a reasonable cost.

Power conditioning, can be a contentious subject like cable religion. 

My experience with a used PP, is positive. If you dont care for the perceived improvements, sell it. Can't imagine NOT listening to my all tubed setup thru regen power.I hear no sonic degradation with my entire system plugged in. Even the plasma is stunning on movie nights.