Power Cord for Accuphase Amplifier


I have a new Accuphase P-4600 amplifier and am looking for a power cord to replace the stock. So far I’ve tried the Cullen Crossfire and the IceAge OFC Frankencable. While both cables have worked well on my source components they have not performed better than the stock on the amplifier. So to those who have Accuphase amplifiers what power cable has worked for you?
 

As I mentioned in other threads Accuphase strongly recommends that you use only the stock cord and so far that has been the best. The. other two have resulted in a darker sound with less soundscape openness. 
 

I’ve been trying to stay under $500 for the cord but would be willing to go a little higher if it improves the amps performance. 

jfrmusic
Post removed 

……you would need to have a system where any changes can be sonically heard . If you don’t or are getting there then you will understand. Mr Jasonbourne71 from all of his emails on this topic must not be there.

Perhaps power cords don’t really make audible differences. 🤷🏻‍♂️

To believe power cords have no effect you either have a system that is not resolving or you are not an experienced listener. I just spent days comparing cords attached to different components and the differences are clearly audible. All I can say to those who deny the possibility of power cords having any effect is that you are missing a key element of improving the performance of your components especially digital source components. Those are the most sensitive to power cords : Streamers and DACs. 

……you would need to have a system where any changes can be sonically heard . If you don’t or are getting there then you will understand. Mr Jasonbourne71 from all of his emails on this topic must not be there.