Primare A32 front panel-rapidly flashing standby indicator light

Anyone own or owned a Primare A32 power amp and had problems with the front panel standby indicator flashing rapidly?  Over the last few months I've had to manipulate the rear left speaker cable inputs to hear sound out of the left speaker each time I turned it on.  But the unit always powered up and eventually played beautifully.  Now I get nothing.  I've disconnected and then reconnected the power cord, the XLR cables from the preamp, and both speaker cables.  The fuse is in good shape.  But the standby indicator still flashes when I try to power it up. A designer flaw I've found is that the front panel is attached by 6 tiny screws (2 on top, 1 on lower L & R side, & 2 underneath).  For such a massive unit one would think the designers could've used sturdier screws.  The top right screw broke a while back and may have left a fragment in the screw hole (hard to tell it's so small).  The front panel now has a little wiggle room which may be causing some wiring hit and miss inside though I can't see how.  I've never pushed or pulled on the front plate after the unit was set up and it's played many months without problems.  I researched online and found Audio Elite Technician LLC in Lakebay WA.  The website says they offer factory authorized service for Primare gear (along with McIntosh gear).  Anybody ever dealt with these guys?  The A32 weighs 88 pounds and I'm not fond of trying to ship it out of state.  Should I try a local repair shop first?  I really love my system's sound and want the A32 back in the game so I can again lose myself in musical bliss.
Greetings Mewsickbuff
 Thanks for the correction.
How bout in the meantime you remove the culprit fuse and install a 5 amp Fast Blow its close enough to protect and if it gives your channel back your saved from shipping until Vana gets you the correct units.
Good day all. I received a reply back from Vana after inquiring about the specific fuse I removed.  They say they'll sell a dozen for $3.60 + shipping.  Sounds like a bargain to me. I've asked for an invoice.  Waiting for a response.  Audioconnection, can I purchase the 5 amp Fast Blow fuse from Radio Shack or a major hardware store?
audioconnection, I want to say a BIG THANKS for your recommendation to install a 5 amp fast blow fuse.  IT WORKED & my amp is back up and running!!!  One exception, I installed a 6 amp fuse instead (purchased from a major hardware store-4 for $8).  I still have a dozen Primare custom fuses coming from VANA ($16 with shipping added) for future mishaps.  But the expert repair folks at Audio Elite said in an email that the A32 is highly reliable.  So hopefully I'll have years (decades) of trouble-free listening ahead.  Thanks for everyone's suggestions!!!  You guys saved me a ton of money!!!  Martyfriedman, DIY and save a ton of money, too.  Best of luck.
mewsickbuff, I am so happy for  you. Great job. I have to get the proper screwdriver and waiting for my bit set to come in from Amazon. Then, off to the races. Thanks for paving the way. Happy listening!
Thanks! for sharing- mewsickbuff
it is refreshing to read about a Lady posting in these threads.
What other gear, including cables, is in your system?

Happy Listening!