Purepower 2000+ and 3000+ actual availability???

Purepower: Over the past 10-12 months, we've heard all the background on how challenging it's been, the fight with members of your old company after the fracture, how it's taken time to setup your production facilities, challenges with shipping, reset and further broken promises on shipping to users and dealers (mine included).

Your response above completely skips over all the substantive feedback and implicit questions from several people with different system configs who have all experienced the same thing, i.e. hum out of speakers and/or amplifiers, etc...when putting a new PP 2000+ or 3000+ unit into the system but we've not heard one thing from PP in response that states you are working on the issue (reported 4-5 months ago at a minimum) and have a path toward resolution.

I for one understand if you don't come right out and state specifics on a public forum but you could at least answer and update replies that are laying fallow in at least 2 cases I know personally, in your Inbox, for the last 3-4 months.

Quality of service in shipping, etc...matters not when what arrives is not usable in high-end audio systems and must be shipped back.

Please address the problems with the 2000+ and 3000+ so that customers who have been loyal in the past and continue to be hopeful you will get past what seem like part choice, design and/or build issues that are causing the hum problems and put out units that can be purchased which hold up to the same quality of build and sound criteria as the prior generation of 2000 and 3000 products. If you do not, I think it is obvious you will forever lose customers starting with this one.

Oxxy, I can report that the currently shipping PurePower+ product - all models - have no reported bugs at all. None. Zip. Nada.

The last and only "bug" in our electronics since the launch of production in September was corrected in December by the relatively simple mechanical revision of increasing the surface area of a heat sink on a secondary PCB to improve cooling and prevent potential overheating of the battery charge board. The only other revision we have made since September is to increase the heat sink size of another PCB in the 3000 model to allow us to delete a secondary cooling fan from the design.

All other activity has been to find and prevent sources of shipping damage. Fortunately we have a very co-operate test partner in UPS who have provided very effective shake and drop testing. That program has also resulted in success and we now see almost no incidents of units arriving with loose components or physical damage.

We have no active engineering activity aimed at resolving operating problems because we have none. All our resources in that area are able to be used for future product development.

Of the last 100 units shipped all are operating properly except for a few units temporarily out of service to undergo the heat sink upgrade at distributor service depots in Asia and Europe. As for our own customer service we have only 2 units currently in warranty service - and one of those was damaged inadvertently by the customer. He is not being charged for the repair.

Wow so all these guys whom reported these hum issues don't know what they are talking about? I find that hard to beleive since a number of them seem well versed in this hobby. Also have seen not one person respond positively to owning a newer plus unit, also seems strange.

Yes, Zephyr, PurePower+ is market ready. We are posting here because of the obvious need to answer all the questions posted on this forum. You seem to be asking three main questions. 1. Are we fixing the hum problems? 2. When will we deliver on all promises of replacement units? 3. When will the PurePower+ reliability and performance be better than the previous generation PurePower units?

Let me answer the last question first. The new PurePower+ product is head and shoulders above the Taiwan built product in sonic performance, electrical specs, reliability, fit and finish, quality control, packaging, customer service turnaround and every other attribute you care to name. The plus units have corrected every deficiency of the old design, and have introduced no new ones. If you have been waiting to try a new Plus unit because you were waiting until it had been perfected, we have passed that point months ago. The product we are shipping today has no known deficiencies and the highest reliability ever.

This is not just hype - we really have no reason to believe there is anything in our current product that needs fixing.

I will answer questions 1 and 2 in separate postings.

I tried a Purepower 2000+ unit in December 2012 after the demarcation (time)line in your posting above which stated you had fixed all defects. It was a newly finished unit at the time and the system hum problem (and buzzing through the speakers) in my system caused me to ship the unit back to you so I would suggest that you are not 'complete' on the + units until you remove the hum and buzzing effect that occurs when you put these units into high-end systems that are stable and do not have these issues. Furthermore, I already utilize a 2000 (non +) unit in this system for the last 2 years and do not

I look forward to you answering 1 and 2 on another thread as I'd love to test a unit that does not manifest the humming and buzzing in my system so that I can upgrade from my 2000 to a quality and completed 2000+.