Puritan PSM156

Furutech IEC ncf fi-33 arrived today.

Looking forward to installing it.

Hi @jerrybj I also fitted a Furutech FI-33 NCF IEC inlet to my Puritan PSM156.
It took a bit of a rework on the panel due to the different shape as compared to the stock inlet. Very nice piece once done though.
The power cable for the PSM156 is a Classic+, I might consider getting hold of an Ultimate. Have you had both, or did you go with Ultimate from the start?

Do you have a Ground Master and Route Master?
I installed a 2.4m copper grounding rod with Ground Master to the PSM156 and Ground Master / Route Master to my streamer, CD player and amplifier.
Very worthwhile as I live <35m from power lines. Perhaps something to look into.

I also put a Ground Master City on my router.
It also has the ATL Audio Ltd. DC Blocker & EMI/RFI/Common Mode Filter that previously served the front end components (very good for such an inexpensive unit).

@protegimus

I had to rework the panel as well.

Haven’t had a listen yet. Lent my USB cable to someone in the UK.

Since my system is down, also lent my DDC, I2S cable and USB reclocker to a friend who lives close.

System will be back up and running at the end of the month. With the addition of the Furutech IEC, I’ve also added some SR Orange fuses to my power supplies, a new coax cable to my modem, some Stack Audio Auva 50 under my rack, a new wifi router, a couple of DXE Iso Plus, another Meicord Opal ethernet cable, an EtherRegen, and an Innuos Phoenix USB reclocker. These should add small/reasonable improvements, but hopefully added together will be a nice step up.

@protegimus 

I realised I hadn't answered your questions.

Since I ordered everything from the UK, I got them all at once. PSM156, Ultimate power cable, and Ground Master City.

My modem/router are plugged into an iFi Powerstation, and powered by a Plixir Elite dual power supply. With the EtherRegen on the system end, my other switch can go on the dirty end.

One of the DXE Iso Plus will go by the modem, with an Acoustic Revive RLI 1Gb Triple C Lan Isolator. From modem to switch and to router.

Thanks @jerrybj, appreciate the update and info. I'm also in the UK.

To complement the FI-33 NCF(R) socket, I replaced the Puritan Classic+ C19 connector and mains plug with
Oyaide C-237 Rhodium/Silver plated 20A IEC plug, C19
Furutech FI-1363R NCF UK Mains Plug (90 degree)

respectively.
The Oyaide is also a nice piece and far less expensive than the equivalent Furutech FI-32, however the Furutech parts are of better construction.

Apologies to the OP for the digression ...what's your thoughts on the EtherRegen? I've read mixed reports.
I've not come across the Acoustic Revive part specifically, will look it up.