Receiver Rotel? and Speakers Maggies? for HT?


Hi,

I need to buy sound gear and video switching for our HT (front projector). Already have a 2-channel separate music system which I love (tube amp with Soliloquy speakers).

Room is about 16x30 with angled ceiling (1.5 story house) on the sides, so speakers for rear surrounds must be small/flat and wall-mountable. Detailed sound processing and clear dialog are number one priorities, without sounding too bright.

Since there do not appear to be any reasonably priced pre/pros ( = 100MHz bandwidth, I've resigned myself to buying a receiver with pre-outs instead. I've got a couple of 2-channel amps with an honest 100W/channel rating floating around, and could always buy another used amp if necessary. The top contenders right now are Rotel RSX-1056 and RSX-1067, though I'm not sure the 1067 (100Wx7) is worth $900 more than the 1056 (75Wx5 with 2 preouts for the other 2 channels).

Thought of getting the new Magnepan MMG W and MMG C speakers, augmented with a Dayton Titanic 10" sub (or 2 if needed). They look nice and fit flat against the wall, perfect for our room. Imaging and clarity are supposed to be their strength, and the lack of bass is made up by the sub(s). Trouble is, they are 4ohm speakers and supposedly difficult to drive. Question is, how are they for HT, would they be "loud" enough for our room, and can the Rotel receivers handle them or will I likely require outboard amplification?

Sorry for the somewhat lengthy post, but I figure more info is better than not enough. You may not have all the answers, but any advise or experience with respect to the above choices are greatly appreciated!

Thx,
Frank
fvoelling
Frank, the Otlaw processor has about as flexible a bass management system as there is! See review from SGTHT mag bellow:
..."The 950's speaker-configuration options are unusually flexible for a product costing under $1000, and extraordinarily simple to adjust. First, you step through your speaker groups (Center, Front, Surround, Surround Rear), indicating whether each group is Small (crossovers will be used), Large (full-range), or nonexistent (except for the main left and right). You can also select quite a few crossover frequencies (40, 60, 80, 100, 120, and 150Hz) by individual speaker group—again, uncommonly accommodating for so affordable a product. A final flourish is hidden on the rear panel, where an Analog Bass Management switch lets you enable an 80Hz highpass filter across the five full-range multichannel inputs. Any sub-80Hz bass contained in those channels is summed and passed along, in the analog domain, to the subwoofer.
As for the video switching for component, 45mhz is more than enough for DVD or High def broadcasts! If however you need a switcher with more inputs, dont' throw out the "Stereophile Award" winning Outlaw 950 pre/pro for this reason! You can buy an outboard Extron Video Switcher that's as good as you can ever expect. I wouldn't however personally go with a receiver as a video switcher for this reason. The Outlaw simply offer too much value and performance to ignore. To me, IT'S ALL ABOUT THE QUALITY!..The outlaw offers just that.
You really need mor than 2 Component video swiching dubties? You can always go dirrect to your video projector/monitor. Otherwise, I recommend the award winning Extron Switchers.
Hope this helps
i recently purchased the Rotel RSX-1056 for my 3rd system in my family room. this is currently just 2-channel with a 50" Fujitsu P50XHA30WS plasma.....it is installed in a closed cabinet with minimal ventilation. the RSX-1056 sounded better than it's big brother (RSX-1067), didn't get as warm, and has a very good interface. i did hear it at the dealer in multi-channel and i preferred it's performance to any of the 'Japanese black boxes' in it's price range. the styling is very pleasing and the build quality is at a higher level than others i considered. the amp seems to have more 'headroom' than it's modest watt rating would indicate.

i am a passionate 2-channel guy and was very impressed with the 2-channel performance into the modest but great sounding Dynaudio Audience 52se speakers. you can click on my system page to see my reference for 2-channel performance.

the HD video switching seems to be transparent.....i like my HD.

in the future i'll be using the 1056 in surround and feel it will do a great job. highly recommended.
All I have to say in Regards to the Rotel gear, is that's it's decent gear. It's not anything super special or anything. I know, I've sold it over the years on a retail level.
One of the best pieces they ever made for the money was the 995 100wx5 amp! It was the deal for the money back then(except the Outlaw 100x7 has it beat now!)
Still, I've talked to Rotel dealers around about what they thought of the Rotel products personally. They all tell me the same as what I gather. They tell me mostly "it's good product, and sells very well!...but that they wouldn't own it personally." This is about right. It's better than average midfi gear, not high fi gear!. And that about sums it up.
I think you're thinking it's the "bargain hifi gear around" I dissagree. It's reviewed a lot, and talked about a lot, like budget high-end. It's not, sorry.
Actually, NAD has consistently been much better sounding over the years! HOWVERE, I can't say the same about quality control from NAD. The Rotel was built a little better.
But, for the bucks, I'm tellin ya. The Outlaw stuff is superb!...simply excellent. Build and performance.
IN your case, you will only do worse sonically for the same or even more money. It has all the flexibility AND FEATURES you need for a high end experience.
Maybe you need more video switching. If that's the case, again, go Extron...no biggie really.
For me, it's quality of sound and picture. Everything else is just 3rd best in importance, if not less. And the Outlaw has a winner at even double their price range!
Exertfluffer, have you heard the current versions of Rotel Receivers, processors and amps?

i am no Rotel champion.....only a satisfied customer of the RSX-1056. i have not heard recent NAD or the Outlaw products. i am just curious whether your generalizations and second hand comments have any direct listening experience to the Rotel RSX-1056 attached?