Record Weights/Disc Stabilizers


I was curious about folks' takes on record weights/disc stabilizers.  Let me start by saying that I'm not as interested in a disc clamp, although I understand why some prefer them.  I have a turntable (Technics SL-1210G) that can handle up to a 1kg weight so the first question--is more weight always better?  Any differences found in what they are made of (outside of how that affects the weight)?  Anything else I should be considering?

I hope to demo a few but wanted to narrow things down a bit if possible.

Thanks!

badgerdms

@badgerdms I’ve found the Waynes Audio ring fairly easy to put on and take off. The jig works pretty well. 

@badgerdms,

The only instance where a record weight might improve playback is with a dished record when playing the convex side. Otherwise they do next to nothing. With perfectly flat records you don't need anything at all. Unfortunately, that applies to less than 10% of the records we purchase. The problem is not a resonating record. It is pitch variation as the tonearm tracks up and down warps. This is way more audible than people think. Put a test record on and stick a dime under the edge of the record then play it and you will hear the tone warble at 33.3 times per minute. It is not as obvious with a complex signal but it ruins the illusion of being at a live venue. 

Peripheral rings do flatten some warps but are a PITA to use and dangerous around delicate cantilevers. They are always used in conjunction with a record weight. In the absence of vacuum clamping reflex clamping is the best solution. The Sota, JA Michell and Basis clamps are examples. They are no more difficult to use than a record weight. You just have to add a twist.

@mijostyn I'm not going to agree with that.  I'm rotating three different weights/stabilizers (and of course are comparing those to not using a weight at all) and my general sonic impressions are similar across all of my records, regardless of whether they are dished,  I actually have one that's somewhat dished and you definitely hear the warble, but that's not the difference that I'm hearing across the board. 

@badgerdms I am a member of what I refer to as my local HiFi Group.

I has quite a few get togethers in a year, some based on having musical encounters only and other mostly based on experiencing Audio Equipment or Supporting Ancillaries.

The intention usually is to become familiarised with a particular device in a well known system, and evaluate whether it might be worth creating the experience of the device in ones home system. 

Platter Mats and Platter Weights have all been put up for trials.

For Platter Spindle Weights both Branded and Home Produced have been used, with materials such as, Metal, Plastic, Wood, Densified Wood and Composites. For certain materials, these have been used as different weights. 

For Platter Mats apart from a 0.9mm Leather type, all other Mats have been bought in, even though a few were not a dedicated Mat, they were cut from a raw material to the dimension for a Platter Mat. Materials used are:

 Metal (Gun Metal in different thicknesses), (Duralumin), Stainless Steel) (AT 666 Vacuum).

Ceramic (singular and stacked).

Composite (Graphite), (Thermoplastic), (Rubber-Cork).

Rubber (Various Types), Oil Filled Rubber, Forex Foam (different thicknesses).

Leather (different thicknesses). 

I have been familiarised with the bulk of the above being demo'd as a group activity, where they have been used on a DD TT, in multiple permutations on TT's used in different homes. Prior to this, I have had the experience of a large proportion of these as a group activity, where they have been used on  I D TT's in different homes. Additionally, I have also experienced a lesser proportion with group members in different homes on BD TT's. 

My own collection of weights and mats have also been loaned out to group members for a long-term evaluations, where extended periods if usage for each permutation that can be put in place is able to be catered for, especially enabling any VTA concerns to be addressed.

As a group activity, time is the constraint. A lot is to be gotten through when this activity is the Topic of the get together. Two Tracks per permutation is the time allowance, ultimately becoming two tracks that are listened to repetitively until the pain threshold is too much, as some attendees have stated, have we found a new form of  torture. Additionally, VTA adjustments are always being considered so some permutations known of for the materials are not duplicated during the demo's. 

A discovery made through the overall experiences having been attended, is that certain TT's are not compatible with the weight that can end up be placed on them. Additionally, TT's that can receive all weights produced from the permutations, respond differently to the permutations of weight/material in different environments.

There is not a ubiquitous method for a selection of materials or materials weight. This ideal combination to be used on a particular TT, is seemingly to be discovered through trials of materials in a particular environment and particular mounting method for the TT.

It is the environment / TT support that are contributing to the energy being transferred to the Platter/ LP and ultimately the Styli. It is the permutations of materials selected to be placed Under/Over the LP. With the materials being selected, used solely for separating the LP from the Platter/Sandwiching the LP, prior to the styli making an interface, that are the main impact on the perception of a sonic being produced. These permutations are capable of producing a sonic that can increase/decrease the attraction for the sonic being used.

In use, are these permutations of materials / weights able to overcome fundamental issues caused by using poorly thought out support structures and mounting methods for a TT? I doubt this very much, support structures for mounting a TT is a different subject. Tidying Up a sonic, to what one perceives to be more attractive to the individual is   what is immediately available from Mat / Spindle Weight permutation.