Is it possible for you simply to admit you made a few innocent but incorrect claims earlier on in this thread? I’m sure you’re a fine person regardless. I only corrected you so as to help others who may be newbies.
Rega Planar 3 50th anniversary
Hello, this is my first post on this site. I’ve had various turntables over the years and currently own a Technics SL-1700 mk. 1. I’ve had it completely refurbished and I think it’s great. I can’t help being attracted to the 50th anniversary planar 3 with the looks and upgrades for the price. I’ve had an entry level pro-Ject manual belt driven table before. I’m curious if the planar 3 would be an upgrade from my Technics. Thanks — Matt
- ...
- 41 posts total
Post removed |
Post removed |
@goodlistening64 " While it does look and seem as though the motor is under the plinth - rather than part of it as the plinth is only 1" thick - there is no way of telling. In truth, no TT mfg provides schematics or information that determines what or how much of the motor is where" another nonsensical statement. There is no turntable in the world that the location of the motor can not be determined. Every manufacturer clearly identifies motor type and its location. Your Technics is direct drive type turntable, the spindle of the platter sits directly on motor shaft. If you remove the platter you will be able to see the motor. Rega turntables have motors mounted in their plinths, after removing the platter the belt around the subplatter and the motor pulley can be clearly seen. On some Rega models, with glass platter, you do not have to remove it to see the platter driving mechanism. Regarding VTA "myth", why then Rega provides shims for VTA adjustments? Must be to cater to the crowd of "delusionals" 🙄 |
Post removed |
- 41 posts total