REL Subwoofer Cable Upgrade?

I own a Rel B3 and tried many cables and I found the Synergistic Tesla Rel Spec 2 to be the best. The cable company can send you a demo. TAS reviewed the previous model Rel Spec Phase II X2 and said it is a must have and I agree.

"I would recommend trying something solid core as an upgrade to the stock stranded wire supplied from REL."

Aha - back to the "coat hanger" conversation?

Seriously, I'm tempted to call the Cable Company as a next step - I remember they had a great loaner service.

Have any of you tried soldering the Neutrik onto a cable? I'm pretty sold now on shorting the stock cord, I'd like to solder a Neutrik onto the second piece, for future flexibility.

Thx
Art

Art, for $200 you can achieve a big difference in bass quality for your REL sub. I tried an extra pair of Cardas Crosslinks I had and put the neutrik end on them for my MJ 200s. The difference was not subtle. Bass was tighter, cleaner and had more umph to it. The Neutrik end screws off with the wires clamped inside with a small set screw. It is also marked + and - for proper polarity.

I did keep this set up for a while then tried the SR PhaseIIs. It did require a bit more tweaking but it was worth it. If you have one sub, give the Cable Co. a call for a loaner or an affordable used one if available.

Personally, I'd forget the cable. An audiophile friend of mine that replaced the rectifiers in the amp of his REL sub reaped better sonic benefits than any cable could ever hope to.

I switched from the standard REL cable on my Strata III to a Synergistic Research Alpha II and found the bass to be tighter, a little deeper, and with a little more punch. Additional, similiar improvements were realized by upgrading the power cable to Audience, and by replacing the Strata's fuse with a HiFi Tuning fuse with ESST contact enhancer. I felt they each made very worthwhile improvements.