Review Shunyata Venom V16 Power Distributor

I know I am new here, but I wanted to share my experience.

I just got the newly released Shunyata Venom V16 power distributor. I also acquired the Shunyata Reference line Delta v2 XC C19 cable to power it. I also purchased the optional SSF-38 shock absorbing feet. This is replacing Audioquest’s Powerquest 3 linear filter power strip.  I know, it’s quite a large jump.

I still have a few more days of burn-in to truly get critical, but right off the bat, day one, this product obliterated the Audioquest’s gains. The sound stage expanded to a degree where the desktop speakers vanished. You could be staring straight at the speaker and swear it wasn’t on. It created a sound “bubble” in the space where sound appeared to travel in three dimensions. The micro details became louder and had more depth. High notes carried further. Piano notes had even more realistic metallic reverb. You could definitively hear when a piano key was struck harder than another. You can hear the shuffle of the player's feet as they work the pedals. Mid-bass tones/instruments no longer affect vocals, as the singer's voice was separate. Words are clear, concise, and sound more life-like. In older songs, you can hear track hiss get louder as a new track is being added into the song. The bass got tighter and more forceful. Then there was the emergence of new bass rhythms that I hadn't heard before in some songs.

Here is the system I am currently using.

Audioengine A2+
Audioengine S8 subwoofer.

The A2+ is being powered by Kimber Kable Summit Palladian
The S8 subwoofer is being powered by Kimber Kable Ascent

I am running these through an Acer Helios 300 Predator using Foobar2000 via USB:

Audioquest FMJ Jitterbug
Audioquest Dragonfly Cobalt
Audioquest Yosemite

From the A2+ I am running Synergistic Research’s Foundation RCA interconnects to the S8 subwoofer.
From A2+’s powered speaker to the passive speaker, I am running a vintage, modified Audioquest CV-4 using their Suregrip 500 series banana plugs.

The laptop is running Shunyata Research’s Venom V14 Digital cable. I am also using Audioquest’s NRG Edison power socket and PS Audio’s Noise Harvester.

A few months ago, I had a full Audioquest loom, using their NRG X,Y, and Z product line. Audioquest refuses to allow their higher end power cable line to have C5 and C7 connectors. As a result, I became somewhat disappointed in Audioquest. It was as if you only get a real glimpse of what they offer if you buy their top-most products and they limit you on what areas you can upgrade. Anything beneath that line is essentially a “broken” version of their better cable, in order to ensure it doesn’t sound superior to the model above it. This led me to seek out other manufacturers. I discovered that even though other companies like, Kimber Kable, Shunyata Research and Synergistic Research also diminish their lower product lines, they don’t do so by damaging the audio signal. They typically reduce the amount of tech, but still use their best technical advances so as not to hurt the signal on purpose. In other words, Audioquest breaks their promise of, “Do no harm.” That doesn’t mean I dislike all Audioquest products. As you can see, I still have some of their product line within this setup and will keep it in the system. Besides, I like having a varying degree of manufacturers to balance all the different “house” sounds. :)

 In about a week or so, I am changing out the AQ Yosemite and AQ CV-4 for Synergistic Research’s Foundation cables. This way I will have a full loom in the direct audio chain.

I have to say, folks have underestimated the A2+, they are extremely well engineered. :)


I have not tested the Venom V16 with its original feet vs the optional feet.  Largely because when I set it up, the system needed to burn in, so doing any sound comparisons would have been skewed. The second problem will be the delicate wiring situation I have going on.  I have all cables balanced just right on risers and in positions where they don't touch each other.  Pulling the unit out of its small shelf would wreck my current wire setup :(. 

If the option comes up where I am forced to reposition the unit and or cables, I will take that opportunity to test it out. :)

The fan and desk lamp I used to help burn in the Venom V16 (per the recommendation of the Shunyata rep) are ungrounded and had no effect on the speakers.

In regards to the Point-O-Matic and the Steaedtler Electric Eraser, I think it has something to do with mechanical electric noise, versus standard electrical noise.  I seem to remember reading something about the effect electrical mechanical noise has on an electrical line.  For example, how you could turn on a blender in the kitchen, and the speakers in your living room receive a hum.

Sadly, I am renting this house and can't make changes to the wiring. I requested, at the time, to be able to change out the electric sockets themselves and was granted that.

If it comes to pass that we are allowed to buy this house, I will reconsider re-wiring because it is an older house and the ground wires are all aluminum.

I contacted Shunyata to discuss what they thought about the devices connected that were making the noise on the system and the answer I got back was intriguing and new to me.

It seems that some devices when "off" or not in use are still drawing power. Phone/device chargers are never "off" and are constantly drawing power waiting for the device to be connected to complete the circuit. Two of the lamps that were connected both have this type of switch.  One actually has a USB device charger built in.  The other uses the exact same type of transformer as a USB charger. The Steadtler Electric eraser was also drawing power.  It's on switch is spring loaded and only activates while the button is depressed.  I also had a USB hub connected.

It was advised to disconnect all those devices and have them on a socket not connected to Venom V16. Not just because of noise.  But because those devices were leeching power that could be used to power the speakers and amps.

Sure enough, I disconnected all those devices as instructed.  I had the speakers going while I was doing this, and once I pulled the lamp and USB hub specifically, the sound got louder. Which was weird; it could have been my imagination, but after all things were removed, the sound quality was richer and louder. The computer and monitor are on Zone 2 and the Sub and Speaker are on Zone 1.  That's all that is currently plugged in. The monitor was more bright and vivid.  I had to have my wife verify.

So, does that mean that the more devices that are plugged into the Venom V16, the lower the power output or lower the quality. *shrug*? Possibly.
Thank you for taking the time with your follow up post. 

I have never had electricity described to me the way it was to you in terms of available power. The power draws on those other devices shouldn’t have impacted the available power to your components at all. I do believe the power systems of the chargers, lamp, and eraser are “dirty” and would generate noise. They describe the Component to Component Isolation (CCI) feature filters noise and doesn’t reflect back into the system. It does make me wonder if the Venom 16 has the ability to filter harmonics associated with those types of power supplies. I wonder if the unit you received has a defect and it isn’t working properly?

Before I make my final decision to purchase the Venom 16 I think it would be wise for me to contact them with some questions regarding the CCI feature. 



Just an update, I had the opportunity to switch the feet on the V16 back to their factory stock and the difference is fairly jarring. My holographic image flattened a bit. Instruments are well placed and clear as usual, but don't seem to move as  deeply forward or backward in space or as far outside the confines of the speakers as it had before. I ran it with the original feet for a few days to see if it just needed to settle a bit.  There wasn't any perceived difference.

So I put the steel feet back on and the music was more lively and my holographic bubble returned. It can therefore be discerned that the Venom V16 is indeed susceptible to vibrations and it can affect performance. O_O I learned something new.