Here's a though -- perhaps invest in a room measurement microphone ($100 give or take) and some free room measurement software for your PC (Room EQ Wizard) and see what the frequency response in your room is right now before doing anything. Next, experiment with some free or inexpensive room treatments to see how that affects things, along with trying different speaker placements. You may find that works out just fine. There are also analog EQ options available (Schiit Loki and its siblings, starting at $150) that may fix a minor problem after you treat the room. Only then may you still want to spend the bucks for a digital room correction system.
Room correction room system vs ears….
So, I splashed out and spent more than I wanted to on a nice little Benchmark amp and preamp etc and since I’ve gone that far I got curious about a room correction system for this and it’s going to cost me over a grand apparently. As far as I can gather these dial in the music before it comes out of the speakers…?
im wondering if I simply messed around and found the sweet spot without a room correction system how much of a difference this would make. I’m far from savvy with audio and try to keep things simple for my simple brain, so, on a scale of 1-10 how much difference would I percieve by splashing out on a room correction system?
- ...
- 71 posts total
Thanks guys , I’m about to start room treatment when I get back, heavy long curtains, bass traps, plenty of soft furnishings etc. what I’m gathering so far is over $1000 on a correction system is not necessary if I complete the treatment. I know that will tame the bass to a great extent but I thought the idea of a room correction system is that it does a lot of math and everything is fixed “before” it leaves the speakers - is that right? Haye to spend $1000 only to hear very little difference. |
@thomastrouble , dsp is limited in what it can fix. IMO getting a flat frequency response in your room is more important than your components. So, as for room treatment it should be done regardless if you use dsp or not. As for dsp it is to help customize your in room response once it is treated. I posted a video below if you want to get more info before you get started. Or, you can get a free consultation from a vendor like Auralex of www.sonitususa.com. If you check the virtual system in my profile I have posted my in room measurements. As for software and mic the Dspeaker or miniDSP Flex will both probably work and I think the upgrade you will get when you achieve a flat frequency response will be outstanding. This video is about an hour but these are the principles I followed to achieve a flat frequency response and Anthony even exchanged e-mails with me:
|
- 71 posts total