Router for Audio Streaming

I have been streaming Pandora, Spotify and Qobuz through a wifi network streamer from a Netgear AC1750 R6400v2 router with no sound quality complaints.

Recently a router firmware update failed (a known issue with these) and as a result it is no longer accessible for administration.  It still seems to perform ok and accepts new devices however the network settings are "frozen" and I am unable to view device IP addresses or traffic, neither via desktop browser nor via the Nighthawk app.

I will try a factory reset but have read that quite often this does not work in these situations, so I started investigating getting a new router to be able to pull the trigger quickly if needed.

I heard/read that routers can make a difference in sound quality, beyond just being able to keep up with streaming with no buffering.  I'm wondering what router experience and recommendations folks have here for reliable audio streaming with superior sound quality at a reasonable price.




It’s best to trust your own ears.

I think the UpTone Audio EtherRegen has a 30 day trial period.

If you can’t hear an improvement, you send it back and save $600!

By going with a combo of high quality and a 3.1 it’s much faster , and 1 less Ethernet cables instead of 3 only 2 ,since my cables are not cheap $2k for 2 

land yes sonicly a high quality Ethernet cable  youcan hear the difference for sure ,

land a good quality Ethernet hum like the uptone audio Ether regen.

question did you check you modem ? Most likely it isa older Obsolete 3.0  model

the 3.1 type is up to 10 x faster potentially.

@soix , thanks.  I guess in that case using a mesh network like a TP-Link Decco, as several folks are recommending, and connecting the streamer via cable to one of the nodes would be even better, no?

I think so. Look, if it doesn’t work just get another streamer and you’re done. I don’t like to fuss with this stuff and just wanna get to the simplest/best option, and this is what I’d do. I don’t think I’m using a mesh network cause I’ll just be using one tp-link AC2600 and don’t need any more nodes. Sad to say I don’t even know if it’s mesh, but it had good specs/ratings so that’s what I’m using but others might have better recommendations. BTW, the Ethernet cable makes a difference and I got a 1m Wireworld Starlight 8 for about $200 that seemed like a good compromise for performance/value.  Don’t cheap out on the Ethernet cable would ne my recommendation.  Sounds silly, but in streaming it’s clear that every piece matters a lot.  FWIW.

I use a ubiquity enterprise router where service comes into house then into the wall and then out feeding feeding into an EtherREGEN with an afterdark PSU and clock.

Once I replaced a cheap router and filtered the signal it made considerable difference. It required a shift in my thinking to recognize that the signal path via Ethernet is an integral critical component.