Seeking lower cost alternatives to Berkeley Audio Design Alpha USB converter
A network bridge may be what you are looking for. Ethernet is inherently low noise and is the best way to get bits from a computer to a DAC. I have a Pi2AES on a Raspberry Pi which produces very low levels of both noise and jitter, spanking much more expensive DDCs. This may be useful: https://www.youtube.com/watch?v=Jvu_doQfAI0&t=152s&ab_channel=GoldenSound |
@pengun - the video you shared just turned everything I thought I knew upside down. Fortunately, I didn't know that much. However, I can't immediately go down the Ethernet, I2S path. As it stands now, my two best DACs do not have I2S inputs. In another post you said: > Just got a Denafrips Ares II. Its really good, a wonderful source for any digital system. That doesn't appear to have an I2S input either. Did you switch DACs? What are you using now? I learned a lot from the video you shared. GoldenSound makes a compelling case for using Ethernet and I2S instead of USB (or Bluetooth aptX HD). I'm also fortunate that my entire place is wired with cat-6. However, until I can acquire the hardware that will let me use I2S everywhere, GoldenSound's comments about using a Raspberry Pi 3b+ caught my attention. However, this video does not explain the basis for his recommendation. Is he saying to replace your PC with a Raspberry Pi 3b+? If so, is the reason simply to get rid of GPU and other noise from a complex system? I already have a simple but powerful headless PC running Linux. It uses a server mb without any GPU. I'm not sure a Raspberry Pi gives me any advantage, and the video doesn't explain things well enough for a beginner like me. |
The output of your PC, via Ethernet, goes to the Raspberry Pi , which uses the Pi2AES to reclock and generate clean digital streams from the bits, that came over the Ethernet port. It uses your PC and the Pi, this way, to feed your DAC this rather nice stream, rather than the much noisier USB stream which the DAC has to deal with normally. You can if you want just hook a USB drive to the Pi and eliminate the PC entirely, but you will need a different OS on the Pi to handle that kind of setup. |
@pengun - thanks. I have another question. > The output of your PC, via Ethernet, goes to the Raspberry Pi Is that part handled by mpd (Music Player Daemon, https://www.musicpd.org/)? What OS/software do you run on your Pi? Volumio? Where are the instructions for setting this up as far as what software is running on the PC, etc.? Thank you. |
