Sony Playstation 1 for a CD player ???

My covers blown : ) I wanna see photos you guys, cya on DIY thanks Audio Luddite.

As an update, I upgraded the power supply caps on my Playstation 1. I replaced the MKT X2 line filter cap with a Wima MKP10 cap of similar rating. Next, I installed a low ESR, high ripple current Nichicon CS electrolytic cap for primary stage smoothing. For the secondary stage smoothing caps, I installed a combination of Nichicon KT audio-grade electrolytics and Panasonic FM electrolytics with a bit more capacitance. After about 45 days of periodical listening, the improvements are quite noticeable. For one, the Playstation now has outstanding dynamic range. Where some crescendos and audio peaks would sound a bit compressed and the soundstage would collapse, the music just tracks smoothly with expanding volume and peaks without a hint of sibilance or loss of detail. If you know the RCA Living Stereo SACD hybrid disc recording of Mussorgsky's "Pictures at an Exhibition," you might know what I'm talking about. The bass is signficantly deeper and better defined than before. The level of detail has further improved in the mids and highs, especially with bells, cymbals, chimes and brush work. I am sure that another contributing factor is that the Black Gate N caps I installed in the signal output stage have more than 200 hours of play time now. The best part about these upgrades and mods is that the Playstation's special midrange texture and detail is still there. It's like upgrading from a Rega to a Linn Sondek LP12--you just retrieve more music from the disc while improving on musicality.

I recently scored on some 4.7uF/25V Sanyo OS-CON (Organic SemiCONductor) electrolytic caps that I've been experimenting with as DC blocking caps in the signal path. These might be even better than the Black Gates, and they don't have the long burn-in period that Black Gates require. We'll see...

Anybody having problems with the Playstation 1 playing burned discs? After the disc clamp broke I recently replaced my 5501 model with the original 1001 (and, yes, the original sounds worlds better--and the 5501 had been making me pretty happy, too). The only problem I have now is that the 1001 does not play SOME burned CDs.

It plays them, but the servo in the player makes noises like it's having trouble tracking and then the music starts glitching with static. I can't see any correlation with age of the burn or scratching or brand of blank CD. I'll buy another 1001 model if the problem is just with my unit, but I don't want to waste the dough if it'll be the same story. Thanks in advance.

Did you try resetting the laser intensity level and bias using the procedure outlined in Mick Feuerbacher's Web site?

http://www.dogbreath.de/PS1/LaserAlignment/Laser.html

This usually cures most tracking problems.

these things are going like hotcakes here on the 'gon. i've seen 3 up and 3 down within the last 2 weeks (myself included). should get mine monday. looking forward to it. Rhing I'll hit you up if i want to take it to 11.