2. speakers
  3. 1097611526

Speaker w/F.R. 100hz & Receiver Bass crossover

I'm trying to build up a econd system.
My receiver is NAD 742.

I'm trying to get a 5 speakers package and interested in Kef KHT 2005 or 5005

As I know, for most receivers, you can set your speaker setting as "large" or "small". If set to "small", signal over 80 goes to the sattlelite speakers and signal below 80hz goes to the subwoofer. I heard that the crossover point of 80hz is recommendation by THX.

Anyway, 2005 speakers goes down to 80hz which works out good, but the more expensive 5005 goes down only to 100hz...

so... isn't that a problem? Am I going to miss the signals from 80hz-100hz on 5005???

http://www.kef.com/KHT/KHT2005.2/sat.htm
http://www.kef.com/KHT/KHT5005/sat.htm
eandylee
eldartford
4,262 posts
 
Didactically...I think we are supposed to be talking about the main speakers of a setup using a subwoofer (or two). In this context a spec of 80 Hz vs 100 Hz is not a big deal, especially because the pricing structure of these two speakers from the same maker suggests that the difference is probably only in the published numbers.

You certainly may stick with your opinion, in fact you are stuck with it!
didactically
142 posts
 
Elderford
>You certainly may stick with your opinion, in fact you are stuck with it! >

You could have gone all day without saying that :-)
eldartford
4,262 posts
 
Didactically...Sorry about that. But you did make yourself such a tempting target. It made my day :-)

Feel free to post any damn fool idea that you might have. You will fit right in!
exertfluffer
270 posts
 
By the way Didactically, for the record, your info regarding figuring the lowest bass frequency a given room may support is incorrect. That is determined by figuring from the "LONGEST DIAGONAL" distance in the room, not the longest wall length!
eandylee OP
124 posts
 
"LONGEST DIAGONAL" distance

yep, now that makes more sense...
More to discover