Speaker Wire for Popular Budget System

Okay, I bought the hype regarding the widely viewed YouTube review which recently launched the Klipsch RP-600M into cult status. Actually did twice - First pair of these I picked up are in an asymmetric, long wall HT situation and I have no gripe at all about that setup. To be honest, I have few gripes about the second pair I acquired along with a NAD C316BEE V2 integrated much like in the YouTube video except that, in that configuration, the RP-600’s propensity to transform itself into a bright/forward ear-drill-on-steroids manifested itself early on and gratuitously so until I stumbled upon a combo room treatment/tweeter-damping-with-felt/ high placement with significant upward rake that has this system sounding 85% of the way I’d hoped it would initially. My question is, what speaker cables would you suggest for this “budget audiophilliac” system to tame that last 15% of forwardness in a manner befitting of Internet-reviewer-enthusiasm heaped of late upon this humble rig?

As always, thanks in advance!
That’s the speaker, andy2, and here is the video that started me on this journey with said speakers:


Today I’m smiling about this latest, 2nd pair of them that I bought (for $377 pr. last month on sale!) but, for whatever reasons, it’s taken about 3 weeks more toil, hair-pulling, and research to get them dialed in nicely than this above video-review would suggest.  I am finally at the point of replacing the gratuitously thin speaker wire currently on this system with a $75-$100ish pair and calling it a success but…….whew!
How’s the volume at your listening position? Do the amp and speakers push enough SPL’s?

It seems you’ve done well renovating the interior with fiberglass and drywall. But, this will never work until you cover the storage loft space. You’re losing too much sound.
Can you hang a canopy of some heavy material? Have it drape over your system level with your ceiling.

The volume at listening position is very good, lowrider57…..Not only is it too loud for my tastes before the dial is at 11 o clock, but low level sound is as good as with any system I’ve owned.  
As per your description, I’m interpreting this canopy as something that could be affixed to the underside of the storage loft as a faux ceiling of sorts above the speakers??  Does stapled-up acoustic ceiling tile seem like it might be a similar option?  I’d also thought of experimenting with paperless fiberglass insulation held in place w/chicken wire as the underside of the loft is very much like an uninsulated wall space albeit with varied widths between the beams.  Definitely sounds interesting…
Try some Kimber 4pr or 8pr cables, kinda affordable.
go to RadioShack and buy their 12 gauge Speaker Cable. Comes on a roll of 25ft or 50ft. I have put this in a number of friends systems that don’t want to spend a lot of money.
The RadioShack speaker cable got some very positive reviews a few years ago. I even use this cable in my second system for my surround speakers, using Kimber 4pr for my front speakers, B&W 801’s.
 I also use a $10K speaker cable on my main system.