Speltz Anti-cable needs break-in period?

And yes I need a pair of 6 ft cables.

Realprober..the cables can only do so much.You may just need a subwoofer for the setup. Also so far the best cables I've come across were 16 awg DIY solid core silver speaker cables. You only need 24 ft..If I were you I would atleast make them 8 ft pairs.This would make the total 32 feet of fine silver wire.

That with maybe 50 ft of 14 awg teflon will run you some where around $50 or $60 tops. I doubt there's a pair of store bought cables even remotely close that can touch them in price verses performance. Infact since this is REAL silver ..you'll have a pair of cables that retail around $1000 if they sold in the store..

Here's a link to get you started Make your own cables. These are easy to make..it won't take you and hour to make up a pair. I wouldn't bother with connectors..just something else in the signal path.You can get the silver wire precut for a couple dollars more.That way no measuring is needed.

Take the money you saved and buy a sealed subwoofer.

Gmood1.

Believe or not, those speakers create frequency range of 35Hz-20KHz due to the double bass reflex enclosures. With proper tunes, they sound truly full range except for the very lowest octave. (at least with my old cables)

I talked to Almarro representives, and they told me a sub doesn't match with these kinda speakers..

Anyway, I will do more research on the silver DIY cables.
Thanks for the recommendation.

Realprober,
Our speakers have similar specs, and going to a heavier gauge cable made a huge difference. Interconnects as well. We just changed our IC's and speaker cables, and even our 4W SET amps are driving hard enough now that we sold our sub. I hope that helps.
Regards,
Howard

Thanks Boa2.

Yeah, I was wondering if I should go with thiker cables.

Do you have any particular heavier gauge cables you recommend?

Thanks again.