Those will provide four places(each connector=2), per capacitor, for corrosion to affect your signal. By shielding from oxygen, soldering eliminates that possibility and attendant loss of fidelity. It would be SO nice, were there a way make a more temporary connection than soldering, without potential corrosion being a reality. Then again; if you're changing those caps quite often......
Swapping capacitors
I built an ANK Dac 2.1 last winter, the output caps are Jensen Aluminum Foil. I just purchased a pair of Jupiter caps and I'm wondering if there's a way to easily change out caps rather than de-soldering every time. I could cut the leads of the Jensens leaving them long and solder some type of connectors, to the leads that would accept the leads from the new caps. Not sure what to use for the connectors and if this is really feasible. Any of you ever done this and if so what connectors did you use?
Thanks
Jeff
Thanks
Jeff
- ...
- 8 posts total
Here's the euro style barrier strips: https://www.mouser.com/Search/Refine?Keyword=euro+barrier+strip |
I use wago lever nuts and solder into place once a decision's been made... may have to add an extra wire, but its super useful. https://www.amazon.com/Wago-221-413-LEVER-NUTS-Conductor-Connectors/dp/B017NQWDY4/ref=pd_lpo_vtph_60_bs_t_1?_encoding=UTF8&psc=1&refRID=827D0H6MWC2JQVC14AYW |
I'm leaning toward's these, euro barrier strips, they are rated for 600v. I will only need 2, but they come in a pack of 50. https://www.amazon.com/MY8HW-1-2-8-0-2P-Style-Terminal-Strip-Position/dp/B075WX2LZW/ref=pd_sbs_328_5/145-2433509-5113048?_encoding=UTF8&pd_rd_i=B075WX2LZW&pd_rd_r=e3612fc8-82cb-11e9-a800-798d64934000&pd_rd_w=CCfYf&pd_rd_wg=EoDho&pf_rd_p=588939de-d3f8-42f1-a3d8-d556eae5797d&pf_rd_r=4NZFE46J4E33KTTAH3Z5&psc=1&refRID=4NZFE46J4E33KTTAH3Z5 Not buying right away, so I'll still be looking for other options. Thanks for all your help. |
- 8 posts total