Synergistic Red Fuse ...

Small silk bags containing multi-color quartz aquarium rocks, with a minimum of two audiophile fuses per bag, are incredibly effective in taming runaway hi-fi systems,  especially after being frozen for at least 48 hours.  Bags should be placed atop speakers and electronic components.  The optimum number of bags is system-dependent. Drawstrings on the bags should be woven from hemp for best performance.

YMMV

I was going to try out a whole compliment of the Bees Wax fuses, but I was afraid they would buzz. And of course, I didn't want to get stung by a snake oil bee. 

They say all these SR fuses sound even better if you freeze them overnight, trouble is you only get 15mins of even more blissful music before they thaw out.
To counter this, one should have a stash of them in the freezer that way you have it covered for a couple of hours.
Then use them for the second time in the opposite direction to counter them getting polarised.

Cheers George

The thing I really like about the fuses, is I can forget about them. After investing the time to determine the best sounding direction (didn't take long at all, in my case), and get through the break in period, I don't have to fiddle with, readjust, tune, or reapply anything. I can just just sit back and enjoy the music.

I did my research, and decided to go with higher values than the stock fuses, so no worries about them blowing; unless something happens where they should blow.

ps
Small silk bags containing multi-color quartz aquarium rocks, with a minimum of two audiophile fuses per bag, are incredibly effective in taming runaway hi-fi systems, especially after being frozen for at least 48 hours. Bags should be placed atop speakers and electronic components. The optimum number of bags is system-dependent. Drawstrings on the bags should be woven from hemp for best performance. YMMV

Lots of yuks, but seriously, folks, there are many ways to improve the performance of any fuse, even super duper aftermarket fuses. To whit,

1. Cryo the fuse or use the trusty home freezer.

2. Apply a contact enhancer such as Quicksilver Gold to the fuse end caps prior to installation.

3. Apply a teeny weeny WA Quantum Chip for Fuses to the fuse in situ.

4. Apply some sort of anti vibration material to the fuse holder.

5. Surround the fuse with a mu metal "tent" to shield it from magnetic fields, especially if there happens to be a large transformer anywhere nearby. As mu metal is conductive ensure mu metal doesn’t contact the fuse end caps.

6. Paint the end caps violet/purple using permanent marker. This can be accomplished in situ.

geoff kait
machina dynamica
no goats, no glory