Theta Digital Casablanca III and Von Schweikert

I used to have the Casablanca I, so I'm not familiar with the crossover features of the III, and I have Von Schweikert speakers, though not the same models as yours - but with your setup I would set every speaker as full/large and direct the .1 channel to the subwoofer and be done with it. Or at least start with that configuration and experiment from there.

Everyone is giving me some great ideas, thank you so very much. Malcolm02, when you indicate the .1 channel, what do you mean?
Thanks again all.
Ray

I hope you’re using the Theta “Master Quickstart Guide” to set up your Casablanca. That takes 99% of the hocus-pocus out off the table.

Rkissner: "Malcolm02, when you indicate the .1 channel, what do you mean?"

The .1 in 5.1, ie. the subwoofer/LFE channel. So your speakers are running full range for the 5 main channels, which yours are capable of handling, and the subwoofer is only handling the channel that is explicitly assigned to it. Simple and straightforward, and you can spend more time listening to music and watching movies and less time fussing with crossovers. My 2 cents anyway. Or you could experiment with crossing over the center and surrounds, but you mains are flat to 20Hz, right?

Thanks again for all the help. I have used the quick start guide to set this up, but I want to fine tune what I have. The manauls are pretty good with the setup, but changing setting is not all that clear. I had set up with the expectation that I add my turntable at a time when I got a phono preamp. Now that I have that all set up, I wanted to make adjustments and wanted to reach out to some experts to figure out how to do it optimally. Thanks again.

Flat to 20Hz? I really don't know.
Ray