Trans Fi Salvation direct rim drive turntable


Hi A'goners, I've just bought this turntable, confident it'll be my last upgrade. The rest of my system is a Tom Evans Groove Plus SRX phono stage, EMM Labs CDSA SE cd player, Hovland HP200 pre/Radia power amps, Zu Definitions Mk 4 loudspeakers, so a pretty good way to listen to vinyl.

Over the years, since 1995 I've progressed from a Roksan Xerxes/Artemiz/Shiraz, via a Michell Orbe/SME V/Transfiguration Orpheus, finally ending up last week with my new Trans Fi Salvation/Trans Fi T3Pro Terminator/Zu modded Denon 103.

This turntable (£2500 UK price, approx $4000-$5000 US) is the brainchild of Vic, a retired dentist, who, fed up with the shortcomings of belt drive and traditionally-pivoted tone arms, literally from the ground up devised first the Terminator air bearing linear tracking tone arm (now in T3Pro guise as on my system), and now the direct rim drive Salvation turntable, a technology in direct opposition to the hegemony of belt drive we've come to accept from the '70s.

In summary, he has developed a motor that directly rim drives an oversize platter. The magic is that vibrations are drained away from the platter and hence stylus. So minimal rumble is transmitted, the weakness of Garrards/Lencos in the past. This is mated to a substantial slate plinth which does a great job of isolating the whole rig from external vibrations.

Where this differs from direct drive is that the torque applied is high enough to counteract stylus drag, but it is strictly analogue controlled ie no digital feedback applying constant micro speed control. Speed is set correctly, torque is sufficient, and speed stability is like a rock.

This is combined with his air bearing linear tracking arm, discussed on other threads.

So technical description over, how about how it sounds? Well, years ago I always assumed the overhang in bass when playing lps on my previous belt drive/pivoted arm tts, apparent as a benign artifact, was all part of the 'romance' of vinyl, esp. when compared to the dry, clinical sound of early cd. But in 2007 I acquired the EMM cd, which had a natural analogue sound playing silver discs, but none of this bass colouration. On studying the growing reemergence of idler/direct drive, and their superiority in maintaining speed stability, I agreed that the belt speed instability might be introducing this.

Two years ago I came across Vic, and now I can report that eliminating the belt for high torque rim drive has taken this whole artifact out of the equation. Whole layers of previously masked information like rhythm guitars are now present, treble information has abundant naturalness and decay, and bass, which appears to be less in quantity compared to belt, is actually more accurate with a real start-stop quality, much more like digital, and the real thing. The other positives are more linked to the arm, including uncanny tracking across the whole record side; I'm really not exaggerating in saying that the last few grooves at the end of an lp side are as solidly reproduced as the first. Music with strong dynamic contrasts are really served well by the Salvation, and I am shocked at how good this all is after trepidation that the sound might be hyperdetailed but too assertive etc. In fact music is reproduced with a relaxed incision, and a welcoming detailed transparency.

The amazing thing is that all of this is not in anyway at the expense of the natural warmth and tonal dimensionality that still puts vinyl way ahead of any digital (imho).

The only thing, and Vic would like this to be known, is that his creation is a cottage industry, and he can only produce limited numbers to order.

I'm happy to answer qs on it, as I really want our community to know about a possible world beating product at real world prices. My tech knowledge will be limited, but no problem discussing sound quality issues.

I'm not affiliated in anyway to the product, just sold my Orbe on ebay and bought this. Regards to all
spiritofmusic
We have been building rim drives for years now and have 120 plus customers
Cheers
Larry
Did consider Ttweights, but with no distributor in UK, was reluctant to go ahead w/out audition.
From what I've read comparing Salvation to Gem Ultra, the Salvation motor and execution is at least on a par, the integral air bearing linear tracking Terminator T3Pro arm makes the Trans Fi choice possible the biggest bargain in high end tts, at third price of Ttweights.
But I'm sure Larry's tt sounds great, the rim drive concept imho really does have major advantages over belt drive.
I had one of the original (#3) TTWeights Black Onyx turntables and it was IMO one of the worst pieces of analog gear owned in my 50+ years of audio.

Noisy, erratic speed, and poor isolation between the table/armboard.

Caveat emptor.

IMO/YMMV
Bill, If you have been in the hobby that long AND you are a dealer, it is no wonder that you are crotchety.

Spirit, Readers should keep in mind that the benefits of the Terminator 3Pro are accessible to most without having to use the Salvation turntable in the bargain. It's the air-bearing tonearm I would buy, if I would buy one, but I shy away from pumps and moisture traps, etc. It's bad enough that I have a car battery in my living room to run my CDP.
I own one of the TTWeights GEM Ultra with the Delrin ring on the platter. It is a superior performer at retrieving music from the groove when compared to my former Rega P3 and VPI TNT. My wife and I are pretty sensitive to pitch and changes in pitch (we listen to classical). It takes a deft hand to set the motor controller. However, the TTW produces the most musical of sound of the tables that I have owned. A fellow audio listener had the same impressions after listening to my TTW (he owns a Garrard 301).

Table isolation is only as good as the base on which the deck and arm pod rest. I use a 1 1/4" solid maple.