TW-Acustic Raven 10.5 or DaVinci Grandezza??

Dertonarm, you are stretching miles to defend the undefendable and might end up in the woods. We are not living in a perfect audio world. Azimuth adjustment available on the arm should be a better solution (although not cost effective for 5K arm) in the unfortunate event when needed than using tiny washers between head shell and cartridge (which is very cost effective for 11K arm).

BTW, your preset opinion against the German arm on the Subject is well documented in another discussion even before its availability and the availability of Uni-Pro as well.

http://forum.audiogon.com/cgi-bin/fr.pl?eanlg&1263686265&openfrom&1&4&&st50

Guess what's really count counts, that's why Uni-Pro has a template for the relative new German arm in the subject. My doubts are whether the template provided by Uni-Pro can be trusted.

10-26-11: Dertonarm
Rockitman, all you need is an oscillating pad and a µV meter - that's it.
The technical straight way to determine coil output independent from stylus position/mounting position.
This way you get the raw coil response - totally independent of any position of the polished area to a groove.

So you mean an Oscilloscope ? And if so, is it simply a matter of connecting the Oscilloscope ground clip to the ground on the left channel and the hot clip (+) to the positive (hot) on the left channel and measuring the voltage, then doing the same for the right channel and then comparing the two to see if the voltages match ? I don't have much Oscilloscope use experience. Just trying to undertsand how I would go about measuring the voltages.

Kdl, I am not "defending the undefendable", but trying (apparently futile with some ..but no problem with that either ) to show, that azimuth adjustment is a bit more tricky and demanding than most think.
And it often leads in the wrong direction.
Give me a reason why we should accept cartridges with a mispositioned stylus.
And don't tell me we have to because it is a fact of life.
It is not a fact - it is the exception and showing ill product quality - and there is no reason to accept a lousy manufactured product.
At least - not for me.
Period.
You won't find a NIB Lyra cartridge with a mispositioned stylus - and you won't find a NOS FR-7 series cartridge of 30+ years with a mispositioned stylus.

TW 10.5 ...;-) ... within Germany the history of that "german tonearm" is much better known than in the USA.

Read careful what you are quoting.
I took position against the "pre-introduction hype and laurels" - for good reason.
I am not particular crazy about that tonearm - because I see and hear no reason to do so.
The tonearm is o.k. and not cheap - no more, no less.
Period.
Sorry to have hurt the feelings of part of the fan-group.

You may have your doubts - as everyone who has no 1st-hand information.
You may ask a few TW 10.5 users (about 4 in the US do have an UNI-template for their TW 10.5 - I do everything on customer's request ...) - they will confirm that their 10.5 sounds in no way worse with "my" template.

All the TW fan group - and a few others will have a great time this late winter when my tonearm is introduced.
But relax - the price will put it out of reach for most, 70% of the limited edition is already sold prior to launch and it requests some really serious turntables to be mounted.

You'll have fun.

Dear Rockitman, I meant an oscillating pad - like the Nagaoka stylus cleaner or similar.
Then you need a µV meter.
An Oscilloscope isn't necessary, but nice to have anyway.
Yes, - you are measuring the output of each coil in µV/mV.

Dear Der, if I went the oscilloscope route, is my explanation of the process to measure voltage on a cart correct ?