Ultimate stereo nightmare


I have a complex stereo system, having accumulated many various components through the years. I also have an impenetrable jumble of wires.  Until now I’ve been able to deal with problems that arose. Now that I am elderly I can’t easily get down on the floor to assess things. I bought and installed new very expensive speaker cables (Audioquest Robin Hood), and subsequently found that my right channel was not working. After switching cables, the right channel was still not working. So the problem is somewhere in the system.  I don’t know if it’s a loose cable or something else and have no way of tackling the jungle of wires to check it out. 
I hired a company that claims they deal with these things, but there’s such complexity I don’t know whether they can deal with it.
 

128x128rvpiano

OP. Start by evaluating your preamp by doing this.

Switch the input interconnects AND the output interconnects SIMULTANEOUSLY. Play some music. If the RIGHT channel is still not working then the problem is in your pre. If instead the LEFT channel is now not working then the problem is somewhere else. Best of luck.

Bruce

OP. I would next evaluate your amp if your pre IS working ok.

Play some music by sending the signal directly into the amp (bypassing the pre) using a CD player, streamer, etc. and see if both channels are working. If the right channel is still not working switch the speaker wire and see if the problem lies in your amp or speaker wires.

Bruce

 

 After seeing your system, here are some suggestions for the technician:

1. Remove the TV from the table top,

2. Put some plastic slider discs under the 4 table legs (found at home depot),

3. Use a couple of belts to wrap around the very bottom of the front table legs,

4. Grab the belts and SLOWLY pull the table away from the wall (may take 2 people),

Note: Disconnect your speaker wire before moving the table (if possible).

This should provide plenty of work room.

Good luck!

 

I have a really stupid suggestion and I am not in any way making any type of comment on one's intelligence or technical capability.  I know a guy whose left channel went out on a brand new, not inexpensive, McIntosh setup.  He was kinda pissed and laid into the dealer who kept telling him this isn't possible.  My friend changed the cables from one channel to the other and confirmed the left one was not working. 

After a bunch of back and forth, the dealer paid a house call to see the problem for himself.  He took the remote, pushed buttons to get to the channel balance function, saw it was 100% over to the right channel, rebalanced for both channels and WOW!  music came out of both channels.   Kind of embarrassing, to my friend 😯

Have you checked your channel balance function?  May save you a house call cost 😏