@jerrybj How does this T-S212 work? Ethernet signal in and out of the same box to filter it and lower noise floor or do you need 2 of them connected on both ends?
Update on good Ethernet switch
ASI mentioned before I didnot want to say the brand until I heard the Ethernet switch not only after 300 hours which was recommended having a OX over controlled clock ,
and with what myself always do the weak link on any audio component starts with the stock power cord , for minimal monies the Pangea using Cardas grade 1 copper 6-9s. Awg14 sig,Mk2 , and getting rid of the 50 cent bottle neck fuse I put in a 1.25amp 20mm L ,slow blow synergistic purple fuse these increase fidelity at least 5-7% the switch itself At least 5% if you know the name Jays audio for transports ,his other company LHY Audio the SW8 Ethernet switch for $595 nothing has all this in a nice machined aluminum case , even the uptone ether regen or Sonore deluxe using a with fiber optic which btw lessens the realism imo both were used witha Sbooster2 LPS , ,theSW8 Ethernet switch is a great buy ,and if you add a decent power cord and upgrade the fuse you will be rewarded further , 7 of us reviewed this and 6 out of 7 thought it was a noticeable improvement vs the others there were2 other brands which were more ,that were not even that good and had switch mode pS
- ...
- 125 posts total
Wifi router to optical adapter via Ethernet. I have a couple of Teradak linear power supplies. One I’ll use on my modem. They are decent power supplies. Certainly have an okay reputation in audio. I will probably look to get one of these at the end of the year (Puritan PSM156 first). |
made a few modifications to our system and have integrated the TaraDak S212 SFP and had to use the FTLF1318P3BTL 1.25Gb/s RoHS Compliant 1310nm SFP Transceiver replacing my 10G cages and transceivers. I will say the OXCO clock in this devise is very beneficial in reducing jitter and this setup with S212 is a performance upgrade to my digital FEU than just going fiber alone. More details to come as the S212 is in my system longer. Very impressed with the $$$ to performance level. All said well under $500.00 for the upgraded S212, FTLF1318P3BTL, Cage and cables. Supra CAT 8 and OCFO. |
@tonywinga , I would recommend decoupling/isolation with a pair of fiber media converters (FMCs/SFP transceivers) and a fiber patch cable in between. Use a low noise lps or similar for the decoupled FMC. Thereafter, use a good ethernet cable from the likes of Audioquest from the decoupled FMC to streamer, etc. It is a more effective approach with very discernable results than spending on these snake oil priced ethernet switches.
|
- 125 posts total