Updated Crossovers for Apogee Stages

the schematics are available online. I also can email them to you when next in Seattle. I was in same boat and decided rather than modify I would just update the caps, etc NOT the inductors as they rarely go bad and the stock factory are pretty good

btw one very fortunate son !!!!!!!!!

Fortunate son indeed! I’d love the schematics and would probably do as you’ve done and simply replace the capacitors etc. I’ve gotten lazy in my old age and was hoping to just replace the whole board and be done with it. Thanks!

Hi tomic601,
I was cruising the internet today looking through all things Apogee when I came across the website audio-reality.com that had a full page on various Apogee speakers which included manuals and crossover schematics. The schematic for the Stage speaker was there. Thanks so much for offering to come to my rescue. I never thought until you mentioned it to put ‘schematic’ together with Apogee in my search. I was hung up on ‘crossover’. 

I also in the process came across a website forum devoted entirely to Apogee users that had been mostly active a few years back. One topic that the forum members addressed regarding the Stage was whether or not to also bypass the high/normal switch. Several recommended this based on the positive sonic benefits and concerns about oxidation on the contacts when the switch was closed. Did you do this?

So now I’m ordering the capacitors, I’m leaving the inductors alone, I’m not sure about the resistor just yet and I’m breaking out my soldering gun. 

Thanks again!

Can you say which capacitors you replaced and with what?