2. speakers
  3. 131372-2279

VMPS speakers--Who has had great success in bringing their VMPS speakers to new heights?

The RM40's BCSE MLS speakers have become my ultimate speaker.  From the moment I heard the VMPS speakers with the ribbon drivers, I thought they were awesome.  I had been out of the hi-fi loop for a long time prior to hearing about Audiogon from a friend.  Therefore, after reading about other notable speakers and parts of systems, I tried many things to get a feel for different sounding systems.  During this time, I found out about system compatibility and how to take the sound to another level--also received many lessons in going the wrong way at times.

I actually had this exact pair earlier in my sound quest but was convinced by well meaning manufacturers that their speaker would trounce the RM40s.  Thus, I tried a couple different speakers and quickly learned that I had a winner in the RM40s.  I now will never make the mistake of selling them again--thanks also to a good friend who advised me of that when asked.  So, I became determined to see how far the RM40s could go.

It has brought me to the point that I thought they need a more organic sound with longer sustains to the notes--they were already very quick in their attack.  They've been sitting on Sistrum SP-101 platforms for a few years.  Brian Cheney told me to never put the speakers on points or in any other way lift them off the floor.  The Sistrums, after a week or so, made an immediate improvement to the live quality of the music, the clarity and transparency at all frequencies, the dynamics, soundstage clues, and it allowed me to take all bass traps out of my system--there was absolutely NO DIFFERENCE in sound, at that point, with them in or out of the system.  There had been prior to installing the Sistrums.  The only drawback to using them was the bass wasn't quite as strong as before--much clearer and more dynamic however.  

With the help of second opinions from friends who've heard my system many times on different occasions, usually after a major change, I began to finally voice the system through component upgrades and wire changes.  Getting the TRL DUDE preamp was a big improvement in bass power, dynamics and overall clarity.  I was very fortunate to have Dan at Modwright replace my MW 9100 Signature Truth which was having a problem in my system that after a few trips to MW to cure--never happened at their place all 3 times I returned it and yet it would do the same problem of a woofer not playing on one speaker while it was in my system each time.  Dan actually sent me a new, fully upgraded MW 5400 at N/C to replace the one I was having problems with.  Dan is unbelievable in customer service.  My digital section was now awesome sounding in all ways.   Nuforce Ref 9 V3 SE mono amps were added later that brought more clarity and dynamics along with outstanding bass to the 40s.   A Whest 3.0 RDT SE phono pre came after that. Excellent clarity and transparency with a balanced frequency range.

At this point I added a TRL power cord to the DUDE with even more powerful sound in all ways and more detail too, including more grunt in the bass.  Also added a Core Power Technologies 150 to run from my Synergistic Research QLS-6 power strip with all my front end components connected to a dedicated Maestro outlet.  More everything.  The other power cords used are Dynamic Design Spirit II on the MW, Mojo Enigma on the power supply to the MW, Wywires Juice II on the mono amps, and Amadi Phil Reference on the Whest.  My heavily modded Lenco TT has its own PC for now.  The arm is a loaded Trans-Fi Terminator with a Benz Micro Ruby 3 w/ myrtlewood body.  

A couple friends brought over some ICs--the Teo GC and JW Reference.  I had very nice silver wired ICs but was looking for more organic sound.  The Teo's provided the organic sound and my friend let me use the JW's for awhile.  I now have Teo GCs on both my from end components with the JW at my preamp to amps.  The JW added more jump factor to the sound.  Having 2 Teo's running CDs or phonos was good, but adding the JW for one Teo was even better.

Synergistic Research added their fantastic UEF panels and dots to my room which is a must hear demonstration at the audio shows to know all they do in a system.

I have many other tweaks and parts upgrades in the near future that will put things over the top.  I could easily live with what I've got now forever, BUT...it's become a total quest to see where these components that I love the sound of as a system can ultimately get.  Parts upgrades to my amps and the DUDE along with high end fuses--NONE so far, making my Sistrum racks shorter, R/X tube dampers from Herbie's and the SBH for CDs, and finally, putting Quicksilver Gold on all the contacts.  The 2 components getting the parts upgrades will take the RM40s where no one has ever heard them soundwise.

Needless to say, I'm having the time of my life listening to all music with the absolute certainty of massive improvements to the sound with what's coming soon.  Thank you to all who've made the products and to friends and advisers that helped me get the sound to this point.  It couldn't have happened without you.  My desire to acquire new products is over, but I still have the drive to bring each of the parts I have to their potential best and see what it becomes.

Any other VMPS owners have a good plan leading to success?







dorkwad
dorkwad OP
548 posts
 
kcpo,

I have made several improvements in the past year taking the sound to a level I just didn't think I'd ever hear.  It has become so rich with lifelike tone.   I have not changed components in quite a few years so I guess the increase in sound quality has come from even better cables and my room is now pretty spectacular.  The room cost including treatments was about $2500.  I still have built in bass traps in the corners that are not finished yet.  I believe I've hit the perfect amount of treatment keeping the sound live but without any harshness of any type.  If my idea of bass trapping behind the new media cabinets using pegboard as the backer works well and the bass becomes even more incredible with no downsides, I'll be in for a real treat.  Today, I added 2 little black boxes with each one plugged into the same outlet as my mono amps.  This was a BIG change.  I'm told this will get better for at least 3-4 weeks.  If this becomes true, WOW!!!  Will keep you advised on what's going on.  Needless to say, the RM40's I have are not only keeping up with the changes, they seem able to keep getting better with no end in sight.  Brian Cheney made this pair very special--but I no longer take them for granted.   I have been very blessed to have assembled this system.  I won't say there is nothing more I can do because I know it's probably false.  I am trying out a possibly fantastic speaker cable and for me, revolutionary method of connecting the cables to the binding posts.  If these sound significantly better than the already very good cables I'm now using, it's going to be shocking when my brother comes to listen for both of us.  He's been the one helping me to rebuild my entire basement, including the listening room.  We have combined ideas and he has some skills beyond what I have.  Thank you Steve!!!

Bob
dorkwad OP
548 posts
 
The speaker cables I tried out are very good, BUT...the Clarity Cables Organic w/jumpers are the ones I will keep for a long time, maybe forever. All other cables sound thin and less involving, not to mention lacking dynamics in comparison. Added 4 Cable Collars to the speaker cables at the point they are connected to the speaker posts. Made a very noticeable difference for the better in realism and live sound. Used two on each speaker’s cables. The large one was able to cover both the speaker’s binding posts and the jumpers to the other posts--both hot and neutral connectors.

Need to reapply Perfect Path Total Contact enhancer to the new cables and touch up the spots on the old connectors where some has rubbed off from unplugging and reattaching. I already know the difference that it will make in 4 and the 8 weeks and even later on. It’s a very exciting time to be listening to music these days.

Never got around to trying the landscape method due to the improvements in the sound of what I already have.  The near finished room is also making a very nice contribution to the sound and a needed one to the need for more space to store records and CDs, etc.

Bob
gmosley
129 posts
 
There is a guy out here in Northern California that purchased the remaining cabinets from the wife of VMPS owner,he had them listed on craigslist, but he was a very hard person to deal with and the talk around town was that he got BLACK BALLED. he had a hard time selling the drivers and cabinets and some of the speakers he sold had car speakers in the cabinets!  he owned a car installation business.so one day i was driving down the street where his business is and he had the remaining cabinets outside in THE RAIN! in his parking lot near the street.
dorkwad OP
548 posts
 
That’s terrible! Sorry to hear that. I’ve bought several pairs of VMPS speakers, many of which were owned by the first owner who had an issue with a part of one speaker. I believe I was able to buy 2 different pairs of very well upgraded RM40’s, one of which I still own; 1 pair of RM30’s upgraded, a pair of 626R’s upgraded, a 215 w/ VSS upgrades subwoofer/amp. I was a demonstrator for VMPS in the Chicago area for the last 5 years of Brian’s life. 3 sets of speakers were sold to me as they were not properly working in all ways. Brian would talk me through what needed to be done on the phone and for under $100 each time, I was able to make them sound great with a small part. The owners contacting me because I was on the VMPS dealer website and they thought I could fix and sell them. Thankfully, Brian was able to diagnose the problem by what I would describe to him. The RM40’s I have are among the 3-4 best sounding RM40’s ever made and are the BCSE version w/ MLS cabinets of bookmatched grained rosewood and all upgrades except the outboard crossover.

I hope that wasn't Patrick Malaga.  He's the one I know who bought up much of the stock stuff left over--drivers, cabinets, crossover parts, etc.

Bob


gmosley
129 posts
 
If he owned a Car Audio install business in El Sobrante Ca. then thats the guy. He had some of the cabinets and some half built cabinets on Craigslist for way RIDICULOUS prices. but I hope he did other people right when he found out that people can and will do their homework on a product and when you try to substitute car audio drivers for the original, that is not a good look.
More to discover