VPI Direct Drive Turntable


I received a copy of the new Music Direct catalog today and saw the new VPI Classic Direct Drive turntable listed at $30,000. It looks virtually indistinguishable from the Classic 3 with the new 3-D tonearm save for three speed buttons in place of the pulley and the rubber belt. The description on the MD website is rather scant, and certainly does not give enough information to explain what makes this turntable $25K more expensive than the belt drive Classic line. The VPI website makes no mention of the new flagship product at all.

Does anyone have any information on this new megabuck VPI table?
actusreus
Lew, I don't really know but the Clearaudio has a Delrin platter with a ceramic magnet bearing. It has a stainless steel subplatter which I think is driven by a DD DC motor. It also has an optical speed controller and will do the dishes after supper, so the WAF is high.
I got the impression that the Brinkman also uses a magnetic drive where the motor isn't directly connected to the platter. I've never even seen these tables so I don't really know what I'm talking about. Going by the sales blurb, they sound pretty cool.

When you were talking about the 980LZS I was loading at 270 ohms. Maybe Raul didn't have loading options on his MC stage at the time and maybe that's why he thinks the HO is better. Mine has very little use so I'm reluctant to be definitive. I'll try it again and see what 2K sounds like.
Regards,

Fleib: "I got the impression that the Brinkman also uses a magnetic drive where the motor isn't directly connected to the platter."

The Brinkmann Bardo and Oasis are both direct drive turntables. They are called by their marketing department as "magnetic drive" but since the motor and platter share the same bearing, the system is direct drive. The platter is a part of the motor where the rotor magnet is attached to the underbelly of the platter and the stator coils (coreless) are below the platter and they complete a coreless motor system that makes the turntable, well, turn.

The fear of a motor attaching to the platter would create wanted vibration is a misguided concept about the direct drive genre when that motor spins at 33rpm, about half hertz!

PS, The Clearaudio Statement, EAR Diskmaster, and Transrotor TMD and FMD systems are entirely different. They are NOT direct drive.

_______

New information on the motor of the new VPI direct drive turntable coming from Mark Doehmann of Continuum in Michael Fremer's Analog Planet website because the Caliburns uses a motor from the same manufacturer. Very interesting.

Here's what he had to say:
Mark Doehmann: "From publicly available information I see the VPI also uses a Thingap TG2310 motor coil which is an off the shelf motor system sans bearing. I was impressed by the low cost method used by VPI engineers to drive the coil effectively as a direct drive system. I'm very familiar with the motor and its true zero cogging performance. In a belt drive system it certainly pays off and the benefits would be translated to a direct drive."
There's more in the comment about the 3D arm too, so look it up. Also look up on ThinGap motors.

_______
Fleib, I was going to quote the very same sentence of yours that is quoted already above by Hiho. To wit: "I got the impression that the Brinkman also uses a magnetic drive where the motor isn't directly connected to the platter."

In addition to what Hiho says, I would only note that in any direct-drive turntable, the motor is not "directly connected" to the platter, IMO. It is more correct to say that the platter is part of the motor. Thus there is nothing touching the platter except the magnetic forces that drive it as part of the motor, the rotor part of a classical motor. The semantics are everything in this case, I think, because those who had poisoned the public mind about DD had repeated over and over for 20 years that there must be a "noise" problem, because the motor is "directly connected" to the platter. Not so. Quite the opposite, in fact. I am pretty sure you know this, but others might not. DD turntables do have some issues unique to the DD technology, but noise of that sort is not one of them.
Lewm: "The semantics are everything in this case, I think, because those who had poisoned the public mind about DD had repeated over and over for 20 years that there must be a "noise" problem, because the motor is "directly connected" to the platter. Not so."
Those poisonous people include, regrettably, some rather intelligent individuals such as Art Dudley, Simon Yorke, various Linn worshipers, et al. As Lew said that the idea of attaching a platter to the motor directly is evil is repeated ad nauseam by notable people is rather shameful.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Back to VPI, I really think they made a marketing misstep on their direct drive model by associating it with the Classic series because since the price discrepancy is so huge that people think it's just a retrofit Classic with DD motor, hence a ripoff. What they should have done is to rename it independently so people right away know it's a flagship product like, for example, the HRX. Back in the days when the HW-19 was ubiquitous (competing with SOTA Sapphire or Linn LP12), they came out with the TNT and nobody seemed to complain at the time. Now, they are left with the chore of explaining the cost of the DD system ad nauseam to those potential Classic upgraders and the cynics. Imagine Toyota comes out with a car costing more than a Lexus model. Oy!

_______