2. amps-preamps
  3. 1386553084

Warm, Smooth yet Transparent Amp

Hello All,
I am currently running an Arcam AVR300 for movies and music, 60/40 respectively. The music portion just isn't happening. Everything works but I'm not getting that "involved/pull you in" kind of feeling. I have gone through several pairs of speakers, Proac tablette 50, Triangle Titus 202, Von Schweikert VR1s and currently Vandersteen 1C. Since this is a wide array of speakers, I've come to the conclusion it must be the amplification.

So now I'm thinking of adding a 2 channel amp running out of the front channels "out". I don't like harsh, shrill highs, but rather a fuller, sweet sounding, yet transparent. Is this possible without spending several thousands of dollars? I am trying to keep it under 1200.00 so used but quality is what I'm hoping for. If Possible. I know that all of you knowledgeable people would have an answer.

I'm also running an Oppo 83 blu ray/cd. Dish K722 receiver for TV. Listen to FM, CDs and MP3 through the Oppo. I'm looking for all the things I have read about on these forums over the years. Good Imaging, transparency, involving. I've read good things about Conrad Johnson MF2250 (affordable used) and I just missed out on one on Ebay, earlier today. Now I'm just frustrated I guess.

Please assist if you can. Oh, I like folk rock, rock, certain new age kind of music. Examples, Dave Matthews, Eric Clapton, Sarah McLaughlin, and everything in between, *chuckle*. Any and All suggestions will be greatly appreciated.

Bruce
denon53
denon53 OP
66 posts
 
John,
Based on your recommendations, using the tape out on the preamp to the tape in on my Arcam will achieve the same affect as a HT bypass. The only time I would turn the preamp on would be to listen to 2 channel sources i.e. FM Tuner, Oppo CD and possibly the DISH reciever for music channels.

All HT sources have digital outputs which will never need the Preamp.

By George I think I've got it! LOL So the CJ Classic is the Ticket!

Once again, thank you one and all. I wish you all a very Merry Christmas and a Happy, Prosperous New Year.

Bruce
jmcgrogan2's avatar
jmcgrogan2
6,346 posts
 
Bruce, sorry for the confusion, but I don't think that using the tape outputs of the CJ into the tape inputs of the Arcam will work. After looking at the rear panel of your Arcam AVR300 in the manual, it looks like your Arcam has only one 7.1 analog input, which will then only work with one source (Oppo?). You would need to run the analog outputs (surround, center, and sub) directly into the DVD-A input RCA's. Then run the FR & FL output of the source into a source input in the CJ Classic. Then run the tape output jacks of the Classic into the DVD-A FR & FL RCA input jacks.

Very complex, and it could work....for one 7.1 source. If you have more than one 7.1 source, or that source doesn't have analog (RCA) outputs, then you could have problems with this setup. You still definitely do not want to use the Pre out jacks of the CJ Classic though, as this would put two volume controls in the loop. I hope this doesn't make things more confusing.
denon53 OP
66 posts
 
John,
What makes you think that using the tape output to tape input work? I mean, it makes sense. I'm currently using the "tape in" on the Arcam for the input of my Sony HD FM tuner. It works great and allows "stereo direct". It sounds pretty good to me. My DVD/CD player is an Oppo bdp83. I use the digital output for 5.1 and a separate two channel output for stereo music. The best of both worlds. :)

Bruce
marco1's avatar
marco1
519 posts
 
Bruce, if I’m reading these posts correctly (label me “Mark on the slow”), what you’re intending to do can work as long as you know to wire the Oppo and Dish once to the new pre for 2 ch. listening and a second time to the existing receiver for surround sound.

Understand though that a tube preamp through a line level input or tape in on the receiver will attenuate the source twice and the volume controls may end up in the least linear part of their ranges. There may be a sonic impact to this, but I guess you can try it.

If you’re looking for some “tube magic”, given your existing set up and budget, I still think that adding an amp will provide the biggest bang for the buck, and in your case adding a tube amp will provide better results than adding a tube preamp.

Good luck,
Mark
denon53 OP
66 posts
 
Hi Mark,
Yes, if I go this route, I would be wiring 2 channel into the preamp and all digital sources would connect to the digital inputs on the receiver via fiber cables. But the preamp would have to possess a "tape monitor" out which the CJ Classic does not. From what is on agon at this moment, it would have to cost much more than my budget. I was hoping to keep it at $1,000.
Your suggestion about a tube amp is what I was thinking about last night. It would make life so much easier and hopefully cheaper. :)

Any suggestions on a decent tube amp under a grand? Used of course.

Thanks,
Bruce
More to discover