Weak Link in Vinyl Playback

Hi Everyone,

I’m looking for some input on a weak link in my system, mostly in regards to my vinyl playback chain in a 12’x11’ room.

I currently have a Technics SL-1700 MK1 with an AT-VM95ML cartridge. The turntable is connected to an iFi Zen Phono. The phono is connected to a Schiit Saga S via 3 ft. Blue Jeans BJC LC-1 cable, and the Saga runs to a single Schiit Vidar by the another set of the same cable. The Vidar is connected to Elac Debut B6.2’s via 10 ft. Belden 50000UE cable (as an aside, my digital path is Pro Ject S2 Pre Box Digital connected by the same 3ft. interconnects to the Saga>Vidar>speakers). I’ve connected a sub previously (a Martin Logan Grotto I that I inherited) to the Saga in the past, but am currently running without it.

My concern is that while the digital path sounds full to me, at least as much as can be expected, the vinyl path sounds a bit thin and weak. I guess I’d describe it as kind of lacking energy. My gut tells me the Saga S having 0 gain in both the passive and buffer mode (I run it in passive mode because it sounds more lifelike to me but I’ve used the buffer in the past as well) is the reason for this, but I’m not positive. I’m ready to upgrade to the Freya S if that’s the solution, but I didn’t want to start throwing money at a problem without really narrowing it down first. The Zen phono is set to MM and gain 1, which should be correct for my cartridge, the interconnects aren’t overly long (the speaker cable being 10’ isn’t too big a deal, I think?), the Vidar should be driving my inefficient speakers with no issue and judging by the digital path, it is. 

I’m hoping someone here can weigh in on what would make the biggest positive impact in my listening and give me the oomph I think I’m missing. For what it’s worth, I plan on doing some room treatment down the road, but that’s not what I’m looking for advice on at the moment.



@robbiesd That was actually me that posted it. Thanks for following up. I looked at it yesterday and saw that screw. I used my alignment tool on it's side to check the head shell angle while on the record and it's dead level so I ended up not needing to adjust.


The scale will definitely help because even the slightest movement of the tonearm weight can create a large change in VTF . I found that I like my setting to be about 5% over the middle of the range .

I have a Tavish design phono preamp that has cartridge loading both MM and MC on the front using dials for on the fly changing .  This turned out to be most useful since one can instantly hear the differences as you are listening , I discovered that I like what would be the minimal recommended load with the hidden load between the cartridge and the phono preamp added in to the total .

Also I am using a passive preamp or should I say an attenuator and input selector.  

How does a Moon LP110 V2 sound like it would pair with my cartridge to everyone here? From what I’m learning, it seems like a decent match?

Please try a Schiit Mani 2 for a week or so. If you don’t like the synergy with your (SAGA), just return it. I run one with my TD-125 mkii, using Shure V-15 and M97 cartridges Shure styli, and am VERY happy (for now) with the performance.


TD-125mkii > Mani 2 > Freya+ w NOS tubes > UREI 6500 amp > Monitor Audio Silver 500 7G speakers.