What Does Holographic Sound Like?


And how do you get there? This is an interesting question. I have finally arrived at a very satisfying level of holography in my system. But it has taken a lot of time, effort and money to get there. I wish there had been a faster, easier and less expensive way to get there. But I never found one.

Can you get to a high level of holography in your system with one pair of interconnects and one pair of speaker wires? I don't believe so. I run cables in series. I never found one pair of interconnects and speaker wires that would achieve what has taken a heck of a lot of wires and "tweaks" to achieve. Let alone all the power cords that I run in series. Although I have found one special cable that has enabled the system to reach a very high level of holography -- HiDiamond -- I still need to run cables in series for the sound to be at its holographic best.

There are many levels of holography. Each level is built incrementally with the addition of one more wire and one more "tweak". I have a lot of wires and "tweaks" in my system. Each cable and each "tweak" has added another level to the holography. Just when I thought things could not get any better -- which has happened many times -- the addition of one more cable or "tweak" enabled the system to reach a higher level yet.

Will one "loom" do the job. I never found that special "loom". To achieve the best effects I have combined cables from Synergistic Research, Bybee, ASI Liveline, Cardas, Supra and HiDiamond -- with "tweaks" too numerous to mention but featuring Bybee products and a variety of other products, many of which have the word "quantum" in their description.

The effort to arrive at this point with my system has been two-fold. Firstly, finding the right cables and "tweaks" for the system. Secondly, finding where to place them in the system for the best effects -- a process of trial and error. A lot of cables and "tweaks" had to be sold off in the process. I put "tweaks" in quotation marks because the best "tweaks" in my system have had as profound effect as the components on the sound. The same for the best of the cables, as well. For me, cables and "tweaks" are components.

Have I finally "arrived"? I have just about arrived at the best level that I can expect within my budget -- there are a couple of items on the way. In any case, I assume there are many levels beyond what my system has arrived at. But since I'll never get there I am sitting back and enjoying the music in the blissful recognition that I don't know what I am missing.

I should mention that there are many elements that are as important as holography for the sound to be satisfying, IMO. They include detail, transparency, coherence, tonality, and dynamics, among others. My system has all of these elements in good measure.

Have you had success with holographic sound in your system? If so, how did you get there?
sabai
GEof,

I know you are a vendor, but its really not right to point out these problems without offering a solution. IT sounds like you know this stuff and have some solutions. IS it your products? Just be forthcoming and tell us how to solve these problems that it would seem most are not aware of. I need answers. Otherwise, you know the saying, ignorance is bliss.... I honestly believe that sometimes!
I'm talking about objects, images and information that change your sensory perception, as opposed to anything that has a DIRECT effect on the audio signal ANYWHERE in the system - the power provided at the wall, cables or electronics, or the acoustic waves in the room. You can't hear the sound you worked so hard to get, the sound that's actually there in the room, because your sensory perception is hurt by the objects, patterns, images, and information - books, CDs, DVDs, telephone books, etc. - in the room.

Geoff - How did you come to this realization, IOW why do you believe this is so?
Mapman my old friend,

Why don't we have a tweaking session and report back. Choose a cheap tweak. I'm going to give that "chip" a try.

Did you ever try the Hifi tuning fuse in your ARC Pre?

If not I would highly recommend some deoxit and clean all the contacts with it, including inputs, outputs, tubes pins, and the fuse holder then try the dreaded fuse. I think you will be pleasantly surprised.

I saw parts connexion have a sale on so you may save a few $.

I am going to try a little more left field...
Chad,

I'm pleading the ignorance is bliss plea for now regarding fuse replacement for the purpose of tweaking the sound.

When the time comes to replace a fuse, I will consider your recommendation. No doubt a good cleaning done right and a good quality replacement fuse can only ever help. I might be willing to drop $20-$30 bucks on a fuse at that time when there is a need, but as may know I can be notoriously cheap and stubborn sometimes, especially when there are still 2 kids to send to college.
My true hope is that when I can forget what I know and replace that with whatever it is that Geof is going to teach me, I can get better sound for less via mind matter interaction rather than than my current cash/vendor approach.