What does Nominal Impedance mean?

What does Nominal Impedance mean?

I’m trying to decide on some new speakers (Clarisys Minute). They are rated at 86-88 sensitivity and a nominal impedance of 3.5 flat. Although graphs show it about 6 ohms from 20hz-500hz and at 2Khz and above about 3 ohms.

My present speakers, Focal Sopra 2 are rated as 91 sensitivity and 8-ohm nominal impedance, but minimum is 3 ohms.

So, I am presently using Bob Carver 350 amps (rated as 350 Amps/channel 8 ohm and 400 watts /channel 4 ohm) which are tube mono blocks. and I like to crank it up at times!

Can someone explain about Nominal Impedance and if my amp(s) will have a problem driving the Clarisys Minute speakers?



michaellent, randym860,

Well, that’s what I think, but sometimes you just never know how different components interact.

Still, it is so confusing trying to figure out the importance of speaker sensitivity and impedance when it comes to speakers.

Wonder why companies just don’t make speakers that are 8+ ohm and with high sensitivity? But it seems to be just the opposite, that is; many of the big-name speaker manufacturers produce speakers that are 4-ohm and low sensitivity.

Wonder why that is?


Nominal means "in name only" and has little to do with the actual impedance of the speaker. That’s why it’s confusing. The speaker impedance is measured across the frequency band and someone at the speaker company looks at it and says hmmm... that looks like about 6 ohmsish on average so we’ll call these 6-ohm speakers.

This is one area where published specs are important. I look at the impedance curve of my speakers and they are a flat 2.5 to 3 ohms from 100hz to 10kHz which tells me I need a hefty solid state amplifier for the low impedance but a tube amp with a 3 ohm output tap would work great also since the impedance is flat.

Nominal impedance in electrical engineeringand audio engineering refers to the approximate designed impedance of an electrical circuit or device.”