What is best tweeter height for the Devore O/96?


On the Devore Orangutan O/96 with the supplied stands from Devore Fidelity, the tweeter height is approximately 31.5 inches from the floor.  By comparison the tweeter height on the Devore Gibbon X is much higher at approximately 36 inches from the floor.  As a general rule, I always thought that it was more ideal to have tweeter height at approximately 36 inches, with the goal of having the tweeter at or near ear level, while in a seated listening position.  Why does the O/96 have such a low tweeter height?  What would be the effect of raising the O/96 to elevate the tweeter height to ear level?  John Devore could have made these stands any height he wanted for optimal sound, so why have the tweeter height so low?  Thanks for your comments.
bayreuth
Post removed 
Hey Sunnyjim, I'm sure that brandy and cigar was what convinced  Art Dudley and the other reviewers to purchase Devore speakers and use them long-term. I purchased mine sans cigar. Bayreuth, that was a great question to start this thread, and thanks for getting the info from John. As an owner of the 0/96, I wondered about that myself and was often tempted to try to raise the height of the speakers, but now I won't waste my time. I've found that the default imaging height for the 0/96 is just above the height of the speaker, but when there is significant vertical imaging on a recording the Devore will "expand" upwards to reproduce it. But I should point out, I am listening with the speakers along the long wall (I get more even bass response that way) and am only about 9 feet from the speakers. When I auditioned them, it was in a much larger room and the imaging was consistently more expansive. I think they deserve a larger room than what I have, but I'm still very enamored of them.
Hey ladok, I totally agree.  The O/96 is capable of excellent imaging, both horizontally and vertically.  It's an amazing speaker and demands first class upstream components to hear it's full potential.  Cheers!
I've been using Shindo Monbrison and Montille (CV391 version), and also a Croft integrated. It's the kind of speaker I'd like to be able to try a dozen different amp/preamps, because it seems to bring out the best in the amps and there are always pleasant surprises. I think the impedence curve has a lot to do with the speaker's success. The implementation of the 10-inch midrange/woofer is also quite amazing, and I'm wondering what it might sound like with a higher-power, high-quality SS amp. Or maybe a First Watt.
I have used the O/96 with a variety of SET amps including 300B and 845 designs with good results.  The O/96 is very revealing of upstream changes in amps and preamps, and it is highly compatible with different designs, including SS amps.  The O/96 works well with the First Watt J2 (as reviewed recently in Stereophile), but the speakers are even better with Pass Labs Class A amplifiers like the XA30.8.  The resolution, bandwidth and imaging are superb with that amp.  I also think the speakers benefit from higher damping factor of these amp designs compared to SET amps.  I'm using the XA30.8 with XP-20 preamp from Pass Labs, a wonderful combination with the O/96.