Who needs a MM cartridge type when we have MC?


Dear friends: who really needs an MM type phono cartridge?, well I will try to share/explain with you what are my experiences about and I hope too that many of you could enrich the topic/subject with your own experiences.

For some years ( in this forum ) and time to time I posted that the MM type cartridge quality sound is better than we know or that we think and like four months ago I start a thread about: http://forum.audiogon.com/cgi-bin/fr.pl?eanlg&1173550723&openusid&zzRauliruegas&4&5#Rauliruegas where we analyse some MM type cartridges.

Well, in the last 10-12 months I buy something like 30+ different MM type phono cartridges ( you can read in my virtual system which ones. ) and I’m still doing it. The purpose of this fact ( “ buy it “ ) is for one way to confirm or not if really those MM type cartridges are good for us ( music lovers ) and at the same time learn about MM vs MC cartridges, as a fact I learn many things other than MM/MC cartridge subject.

If we take a look to the Agon analog members at least 90% of them use ( only ) MC phono cartridges, if we take a look to the “ professional reviewers “ ( TAS, Stereophile, Positive Feedback, Enjoy the Music, etc, etc, ) 95% ( at least ) of them use only MC cartridges ( well I know that for example: REG and NG of TAS and RJR of Stereophile use only MM type cartridges!!!!!!!! ) , if we take a look to the phono cartridge manufacturers more than 90% of them build/design for MC cartridges and if you speak with audio dealers almost all will tell you that the MC cartridges is the way to go.

So, who are wrong/right, the few ( like me ) that speak that the MM type is a very good alternative or the “ whole “ cartridge industry that think and support the MC cartridge only valid alternative?

IMHO I think that both groups are not totally wrong/right and that the subject is not who is wrong/right but that the subject is : KNOW-HOW or NON KNOW-HOW about.

Many years ago when I was introduced to the “ high end “ the cartridges were almost MM type ones: Shure, Stanton, Pickering, Empire, etc, etc. In those time I remember that one dealer told me that if I really want to be nearest to the music I have to buy the Empire 4000 D ( they say for 4-channel reproduction as well. ) and this was truly my first encounter with a “ high end cartridge “, I buy the 4000D I for 70.00 dls ( I can’t pay 150.00 for the D III. ), btw the specs of these Empire cartridges were impressive even today, look: frequency response: 5-50,000Hz, channel separation: 35db, tracking force range: 0.25grs to 1.25grs!!!!!!!!, just impressive, but there are some cartridges which frequency response goes to 100,000Hz!!!!!!!!!!

I start to learn about and I follow to buying other MM type cartridges ( in those times I never imagine nothing about MC cartridges: I don’t imagine of its existence!!!. ) like AKG, Micro Acoustics, ADC, B&O, Audio Technica, Sonus, etc, etc.

Years latter the same dealer told me about the MC marvelous cartridges and he introduce me to the Denon-103 following with the 103-D and the Fulton High performance, so I start to buy and hear MC cartridges. I start to read audio magazines about either cartridge type: MM and Mc ones.

I have to make changes in my audio system ( because of the low output of the MC cartridges and because I was learning how to improve the performance of my audio system ) and I follow what the reviewers/audio dealers “ speak “ about, I was un-experienced !!!!!!!, I was learning ( well I’m yet. ).

I can tell you many good/bad histories about but I don’t want that the thread was/is boring for you, so please let me tell you what I learn and where I’m standing today about:

over the years I invested thousands of dollars on several top “ high end “ MC cartridges, from the Sumiko Celebration passing for Lyras, Koetsu, Van denHul, to Allaerts ones ( just name it and I can tell that I own or owned. ), what I already invest on MC cartridges represent almost 70-80% price of my audio system.

Suddenly I stop buying MC cartridges and decide to start again with some of the MM type cartridges that I already own and what I heard motivate me to start the search for more of those “ hidden jewels “ that are ( here and now ) the MM phono cartridges and learn why are so good and how to obtain its best quality sound reproduction ( as a fact I learn many things other than MM cartridge about. ).

I don’t start this “ finding “ like a contest between MC and MM type cartridges.
The MC cartridges are as good as we already know and this is not the subject here, the subject is about MM type quality performance and how achieve the best with those cartridges.

First than all I try to identify and understand the most important characteristics ( and what they “ means “. ) of the MM type cartridges ( something that in part I already have it because our phonolinepreamp design needs. ) and its differences with the MC ones.

Well, first than all is that are high output cartridges, very high compliance ones ( 50cu is not rare. ), low or very low tracking force ones, likes 47kOhms and up, susceptible to some capacitance changes, user stylus replacement, sometimes we can use a different replacement stylus making an improvement with out the necessity to buy the next top model in the cartridge line , low and very low weight cartridges, almost all of them are build of plastic material with aluminum cantilever and with eliptical or “ old “ line contact stylus ( shibata ) ( here we don’t find: Jade/Coral/Titanium/etc, bodies or sophisticated build material cantilevers and sophisticated stylus shape. ), very very… what I say? Extremely low prices from 40.00 to 300.00 dls!!!!!!!!!!!!!!!!!!, well one of my cartridges I buy it for 8.99 dls ( one month ago ): WOW!!!!!!, so any one of you can/could have/buy ten to twenty MM cartridges for the price of one of the MC cartridge you own today and the good notice is that is a chance that those 10-20 MM type cartridges even the quality performance of your MC cartridge or beat it.

Other characteristics is that the builders show how proud they were/are on its MM type cartridges design, almost all those cartridges comes with a first rate box, comes with charts/diagrams of its frequency response and cartridge channel separation ( where they tell us which test recording use it, with which VTF, at which temperature, etc, etc. ), comes with a very wide explanation of the why’s and how’s of its design and the usual explanation to mount the cartridge along with a very wide list of specifications ( that were the envy of any of today MC ones where sometimes we really don’t know nothing about. ), comes with a set of screws/nuts, comes with a stylus brush and even with stylus cleaning fluid!!!!!!!!!, my GOD. Well, there are cartridges like the Supex SM 100MK2 that comes with two different stylus!!!! One with spherical and one with elliptical/shibata shape and dear friends all those in the same low low price!!!!!!!!!!!

Almost all the cartridges I own you can find it through Ebay and Agon and through cartridge dealers and don’t worry if you loose/broke the stylus cartridge or you find the cartridge but with out stylus, you always can/could find the stylus replacement, no problem about there are some stylus and cartridge sources.

When I’m talking about MM type cartridges I’m refer to different types: moving magnet, moving iron, moving flux, electret, variable reluctance, induced magnet, etc, etc. ( here is not the place to explain the differences on all those MM type cartridges. Maybe on other future thread. ).

I made all my very long ( time consuming ) cartridge tests using four different TT’s: Acoustic Signature Analog One MK2, Micro Seiki RX-5000, Luxman PD 310 and Technics SP-10 MK2, I use only removable headshell S and J shape tonearms with 15mm on overhang, I use different material build/ shape design /weight headshells. I test each cartridge in at least three different tonearms and some times in 3-4 different headshells till I find the “ right “ match where the cartridge perform the best, no I’m not saying that I already finish or that I already find the “ perfect “ match: cartridge/headshell/tonearm but I think I’m near that ideal target.

Through my testing experience I learn/ confirm that trying to find the right tonearm/headshell for any cartridge is well worth the effort and more important that be changing the TT. When I switch from a TT to another different one the changes on the quality cartridge performance were/are minimal in comparison to a change in the tonearm/headshell, this fact was consistent with any of those cartridges including MC ones.

So after the Phonolinepreamplifier IMHO the tonearm/headshell match for any cartridge is the more important subject, it is so important and complex that in the same tonearm ( with the same headshell wires ) but with different headshell ( even when the headshell weight were the same ) shape or build material headshell the quality cartridge performance can/could be way different.

All those experiences told me that chances are that the cartridge that you own ( MC or MM ) is not performing at its best because chances are that the tonearm you own is not the best match for that cartridge!!!!!!, so imagine what do you can/could hear when your cartridge is or will be on the right tonearm???!!!!!!!!, IMHO there are ( till today ) no single ( any type at any price ) perfect universal tonearm. IMHO there is no “ the best tonearm “, what exist or could exist is a “ best tonearm match for “ that “ cartridge “, but that’s all. Of course that are “ lucky “ tonearms that are very good match for more than one cartridge but don’t for every single cartridge.

I posted several times that I’m not a tonearm collector, that I own all those tonearms to have alternatives for my cartridges and with removable headshells my 15 tonearms are really like 100+ tonearms : a very wide options/alternatives for almost any cartridge!!!!!!

You can find several of these MM type cartridges new brand or NOS like: Ortofon, Nagaoka, Audio Technica, Astatic, B&O, Rega, Empire, Sonus Reson,Goldring,Clearaudio, Grado, Shelter, Garrot, etc. and all of them second hand in very good operational condition. As a fact I buy two and even three cartridges of the same model in some of the cartridges ( so right now I have some samples that I think I don’t use any more. ) to prevent that one of them arrive in non operational condition but I’m glad to say that all them arrive in very fine conditions. I buy one or two of the cartridges with no stylus or with the stylus out of work but I don’t have any trouble because I could find the stylus replacement on different sources and in some case the original new replacement.

All these buy/find cartridges was very time consuming and we have to have a lot of patience and a little lucky to obtain what we are looking for but I can asure you that is worth of it.

Ok, I think it is time to share my performance cartridge findings:

first we have to have a Phonolinepreamplifier with a very good MM phono stage ( at least at the same level that the MC stage. ). I’m lucky because my Phonolinepreamplifier has two independent phono stages, one for the MM and one for MC: both were designed for the specifics needs of each cartridge type, MM or MC that have different needs.

we need a decent TT and decent tonearm.

we have to load the MM cartridges not at 47K but at 100K ( at least 75K not less. ).

I find that using 47K ( a standard manufacture recommendation ) prevent to obtain the best quality performance, 100K make the difference. I try this with all those MM type cartridges and in all of them I achieve the best performance with 100K load impedance.

I find too that using the manufacturer capacitance advise not always is for the better, till “ the end of the day “ I find that between 100-150pf ( total capacitance including cable capacitance. ) all the cartridges performs at its best.

I start to change the load impedance on MM cartridges like a synonymous that what many of us made with MC cartridges where we try with different load impedance values, latter I read on the Empire 4000 DIII that the precise load impedance must be 100kOhms and in a white paper of some Grace F9 tests the used impedance value was 100kOhms, the same that I read on other operational MM cartridge manual and my ears tell/told me that 100kOhms is “ the value “.

Before I go on I want to remember you that several of those MM type cartridges ( almost all ) were build more than 30+ years ago!!!!!!!! and today performs at the same top quality level than today MC/MM top quality cartridges!!!!!, any brand at any price and in some ways beat it.

I use 4-5 recordings that I know very well and that give me the right answers to know that any cartridge is performing at its best or near it. Many times what I heard through those recordings were fine: everything were on target however the music don’t come “ alive “ don’t “ tell me “ nothing, I was not feeling the emotion that the music can communicate. In those cartridge cases I have to try it in other tonearm and/or with a different headshell till the “ feelings comes “ and only when this was achieved I then was satisfied.

All the tests were made with a volume level ( SPL ) where the recording “ shines “ and comes alive like in a live event. Sometimes changing the volume level by 1-1.5 db fixed everything.

Of course that the people that in a regular manner attend to hear/heard live music it will be more easy to know when something is right or wrong.

Well, Raul go on!!: one characteristic on the MM cartridges set-up was that almost all them likes to ride with a positive ( little/small ) VTA only the Grace Ruby and F9E and Sonus Gold Blue likes a negative VTA , on the other hand with the Nagaoka MP 50 Super and the Ortofon’s I use a flat VTA.

Regarding the VTF I use the manufacturer advise and sometimes 0.1+grs.
Of course that I made fine tuning through moderate changes in the Azymuth and for anti-skate I use between half/third VTF value.

I use different material build headshells: aluminum, composite aluminum, magnesium, composite magnesium, ceramic, wood and non magnetic stainless steel, these cartridges comes from Audio Technica, Denon, SAEC, Technics, Fidelity Research, Belldream, Grace, Nagaoka, Koetsu, Dynavector and Audiocraft.
All of them but the wood made ( the wood does not likes to any cartridge. ) very good job . It is here where a cartridge could seems good or very good depending of the headshell where is mounted and the tonearm.
Example, I have hard time with some of those cartridge like the Audio Technica AT 20SS where its performance was on the bright sound that sometimes was harsh till I find that the ceramic headshell was/is the right match now this cartridge perform beautiful, something similar happen with the Nagaoka ( Jeweltone in Japan ), Shelter , Grace, Garrot , AKG and B&O but when were mounted in the right headshell/tonearm all them performs great.

Other things that you have to know: I use two different cooper headshell wires, both very neutral and with similar “ sound “ and I use three different phono cables, all three very neutral too with some differences on the sound performance but nothing that “ makes the difference “ on the quality sound of any of my cartridges, either MM or MC, btw I know extremely well those phono cables: Analysis Plus, Harmonic Technologies and Kimber Kable ( all three the silver models. ), finally and don’t less important is that those phono cables were wired in balanced way to take advantage of my Phonolinepreamp fully balanced design.

What do you note the first time you put your MM cartridge on the record?, well a total absence of noise/hum or the like that you have through your MC cartridges ( and that is not a cartridge problem but a Phonolinepreamp problem due to the low output of the MC cartridges. ), a dead silent black ( beautiful ) soundstage where appear the MUSIC performance, this experience alone is worth it.

The second and maybe the most important MM cartridge characteristic is that you hear/heard the MUSIC flow/run extremely “ easy “ with no distracting sound distortions/artifacts ( I can’t explain exactly this very important subject but it is wonderful ) even you can hear/heard “ sounds/notes “ that you never before heard it and you even don’t know exist on the recording: what a experience!!!!!!!!!!!

IMHO I think that the MUSIC run so easily through a MM cartridge due ( between other facts ) to its very high compliance characteristic on almost any MM cartridge.

This very high compliance permit ( between other things like be less sensitive to out-center hole records. ) to these cartridges stay always in contact with the groove and never loose that groove contact not even on the grooves that were recorded at very high velocity, something that a low/medium cartridge compliance can’t achieve, due to this low/medium compliance characteristic the MC cartridges loose ( time to time and depending of the recorded velocity ) groove contact ( minute extremely minute loose contact, but exist. ) and the quality sound performance suffer about and we can hear it, the same pass with the MC cartridges when are playing the inner grooves on a record instead the very high compliance MM cartridges because has better tracking drive perform better than the MC ones at inner record grooves and here too we can hear it.

Btw, some Agoners ask very worried ( on more than one Agon thread ) that its cartridge can’t track ( clean ) the cannons on the 1812 Telarc recording and usually the answers that different people posted were something like this: “””” don’t worry about other than that Telarc recording no other commercial recording comes recorded at that so high velocity, if you don’t have trouble with other of your LP’s then stay calm. “””””

Well, this standard answer have some “ sense “ but the people ( like me ) that already has/have the experience to hear/heard a MM or MC ( like the Ortofon MC 2000 or the Denon DS1, high compliance Mc cartridges. ) cartridge that pass easily the 1812 Telarc test can tell us that those cartridges make a huge difference in the quality sound reproduction of any “ normal “ recording, so it is more important that what we think to have a better cartridge tracking groove drive!!!!

There are many facts around the MM cartridge subject but till we try it in the right set-up it will be ( for some people ) difficult to understand “ those beauties “. Something that I admire on the MM cartridges is how ( almost all of them ) they handle the frequency extremes: the low bass with the right pitch/heft/tight/vivid with no colorations of the kind “ organic !!” that many non know-how people speak about, the highs neutral/open/transparent/airy believable like the live music, these frequency extremes handle make that the MUSIC flow in our minds to wake up our feelings/emotions that at “ the end of the day “ is all what a music lover is looking for.
These not means that these cartridges don’t shine on the midrange because they do too and they have very good soundstage but here is more system/room dependent.

Well we have a very good alternative on the ( very low price ) MM type cartridges to achieve that music target and I’m not saying that you change your MC cartridge for a MM one: NO, what I’m trying to tell you is that it is worth to have ( as many you can buy/find ) the MM type cartridges along your MC ones

I want to tell you that I can live happy with any of those MM cartridges and I’m not saying with this that all of them perform at the same quality level NO!! what I’m saying is that all of them are very good performers, all of them approach you nearest to the music.

If you ask me which one is the best I can tell you that this will be a very hard “ call “ an almost impossible to decide, I think that I can make a difference between the very good ones and the stellar ones where IMHO the next cartridges belongs to this group:

Audio Technica ATML 170 and 180 OCC, Grado The Amber Tribute, Grace Ruby, Garrot P77, Nagaoka MP-50 Super, B&O MMC2 and MMC20CL, AKG P8ES SuperNova, Reson Reca ,Astatic MF-100 and Stanton LZS 981.

There are other ones that are really near this group: ADC Astrion, Supex MF-100 MK2, Micro Acoustics MA630/830, Empire 750 LTD and 600LAC, Sonus Dimension 5, Astatic MF-200 and 300 and the Acutex 320III.

The other ones are very good too but less refined ones.
I try too ( owned or borrowed for a friend ) the Shure IV and VMR, Music maker 2-3 and Clearaudio Virtuoso/Maestro, from these I could recommended only the Clearaudios the Shure’s and Music Maker are almost mediocre ones performers.
I forgot I try to the B&O Soundsmith versions, well this cartridges are good but are different from the original B&O ( that I prefer. ) due that the Sounsmith ones use ruby cantilevers instead the original B&O sapphire ones that for what I tested sounds more natural and less hi-fi like the ruby ones.

What I learn other that the importance on the quality sound reproduction through MM type cartridges?, well that unfortunately the advance in the design looking for a better quality cartridge performers advance almost nothing either on MM and MC cartridges.

Yes, today we have different/advanced body cartridge materials, different cantilever build materials, different stylus shape/profile, different, different,,,,different, but the quality sound reproduction is almost the same with cartridges build 30+ years ago and this is a fact. The same occur with TT’s and tonearms. Is sad to speak in this way but it is what we have today. Please, I’m not saying that some cartridges designs don’t grow up because they did it, example: Koetsu they today Koetsu’s are better performers that the old ones but against other cartridges the Koetsu ones don’t advance and many old and today cartridges MM/MC beat them easily.

Where I think the audio industry grow-up for the better are in electronic audio items ( like the Phonolinepreamps ), speakers and room treatment, but this is only my HO.

I know that there are many things that I forgot and many other things that we have to think about but what you can read here is IMHO a good point to start.

Regards and enjoy the music.
Raul.
Ag insider logo xs@2xrauliruegas
Dear Fleib: +++++ " In the unlikely event that you rise above preconceptions and recognise the superiority of the LZ, a..." +++++

in this thread and years before came the justified Stanton/Pickering today " fever " I posted ( and if I remember years even before in other thread. ) not only my preference for the 981 H against the L version but why. Today an after I bought ( again ) both versions that opinion is confirmed ( by a tiny tiny hair. I can live happy with either. ) but I would like that you can share with us your first hand today experiences with both cartridges and the differences you appreciated that makes your preference on the L version, I'm really interested about because maybe I'm missing something about.

Thank you in advance.

Btw, believe it or not when I gave/give/express an opinion always was and is determined by performance only. Expectations are almost always part of the pre-test/before test evaluation and is part of the " fun " but in my case never determine my final opinion. You can be sure about.

Regards and enjoy the music,
R.
Happy New Year All

Catching up on the thread with the Stanton 981 input makes me wonder as i have my 881 mk2 Findley setup on a nats butt. In the interim i picked up a Black Widow to mate to all of those high compliance MMs i have acquired. I did not have the original protractor and had Ken Willis make me up one of his fine protractors for the Widow. This was the final piece of the puzzle for getting 881s dialed in. Had to make some adjustments to the head shell on the Widow to hit Infinitys orginal null points. Then Squaring up 881 and adjust azimuth. Thinking that all is well and good just by getting pivot to spindle right and squaring the cartridge with the headshell on a arm like the Widow without overhang adjustment is all thats needed for setup won't get it. Music was brittle and low bass very weak after proper setup with the right tool theres musical magic. Does 881 match up to my 155/160 favorite probably not but its growing on me. 881 is truly a superior MM pickup.

Has any of you tried the new Garrott P77i micro scanner.

Well time for the cabbage and black eyed peas luck and money for the new year.
Mike
Dear Frogman, Our Professor and in some sense Raul give
already the answer for the 'mediocrity' question. I thought only in the context of the available knowledge and was wondering about 'mediocrity' in this connection. Our Professor deed not mention the labour productivity question explicit but well the time prescribed in the manufacturing process for each individual part which means
the same. Raul's 'hand selected' parts obviously also involve time spend in
production. In contradistinction to this manufacturing process there are individuals like Takeda, Allearts and some others who spend much time and effort to each detail
by production of an cart. No wonder that such carts are much more expensive. Looking from this aspect of the production process we may wonder about the fact that there
are also very good carts produced despite the time restrictions which labour productivity determine.
Regarding my debts to you are you interested in some tonearms? I plundered my own bank account lately so I can only pay in natura at the moment (smile).

Regards,
Dear Raul, That is very interesting, what you say about Guillermo's motivation when he purchased the Sound Labs. I still stand ready to give him some tips on important upgrades that will dramatically improve them. The first, easiest, and cost-free thing he should do is to disconnect/bypass/discard that "Brilliance" control. It is a cheap L-pad that adds a gray coloration to the sound, and since the treble transformer operates at frequencies from about 250Hz (where it is 6db down) to 20kHz and beyond, removing it is like going to the dentist to extract a nagging tooth that is aching; after you've done it, you wonder why you ever put up with it. Better to control the tonal balance by room treatment.
Raul,
As you are aware, I also have both the LZ and HZ 981's. I have spent hours swapping them back and forth trying to determine why "if at all", one could be preferred over the other. The comment you made, "tiny, tiny, hair", can not be stated more in the comparisons between these two cartridges. I have observed that after spending days listening to M/M,M/I style cartridges only, placing the LZ version in the session, I find it ever so slightly bright. Before anyone jumps to some type of conclusion, I must state I also tried it the other way. Days of listening to only M/C's, then adding to the session, the HZ version, I found it ever so slightly bass heavy. This hasn't come down to which is better, just what are the perceived differences. I too, could live with either, and I plan on doing just that. As far as one requiring a SUT and perhaps that's where the difference comes into play, well I hear no difference between weather SUT was in or out. When in, volume was set at 11:00. When out, the volume had to be set at 5:00. Perhaps there is distortion differences at various knob positions. I don't know. It's just to close to state one is better than the other. Preferring one over the other, well the door is wide open as to why, right down to signal levels pertaining to wire resistance in interconnect cables.
Regards,
Don
Regards,