Why are there no high end cheater plugs?


Yes, I know there are safety reasons for not using such ground lifting devices; but as many audio magazines have suggested, the benefits from lifting all grounds except the preamp are quite substantial. But the 79 cent cheater plug covers much of the improvement. I made some cheater plugs using silver wire but Eagle plugs. They are better than the grey guys. Why does no one make a quality plug? I understand that at one time Siltech did make such a plug.

Please no "educate" me of the safety reasons for not using cheater plugs. I think the success that our immediate ancestors had in surviving two plug ac, suggest that chassis shorts must be quite rare.
tbg
I thought there was such a risk, I would not do it. This is an urban myth.

This guy says you are wrong:

http://www.prosoundweb.com/studyhall/sr/whitlock/grounding.php

I'll take his opinion over yours.
Rex, I am not asking you to ignore this. He basically tells you to live with the problems of ground loops. He ignores the fact that many component have no ground connection. And he ignore that many home presently lack three wire electrical supplies. He also ignores that most faults will result in tripping the breaker. All I can say is that my city's electrical department was unconcerned and my insurance company expressed no concern. Thanks for your concern, however.
Tbg - my concern is not for you. It's clear that your mind is made up, that you have crystallized your lack of knowledge, and that you will not be swayed by any facts that counter your opinion.

Bill Whitlock is not ignoring anything - you are. You are dismissing anything that does not agree with your flawed logic. I do hope you don't suffer any harm because of your ignorance, but I'm not concerned for you - if anything bad happens, it will be entirely your choice, and your fault. I respect your right to do stupid, potentially harmful things, as long as you don't hurt anyone else in the process.

I'm more concerned about others who might be lulled into thinking what you are advocating is without risk - that whole "urban myth" nonsense you posted. That's why I posted the link - so others can see that someone who actually knows what he's talking about doesn't agree with your viewpoint.

Best of luck to you.
Rex, please don't assume that I am doing this purely on a logic of my own. There is little question that having the grounds wires are a more safe condition than not having them. It also would be yet safer to have no electricity in your home. Please reread my initial post and remember that I asked only about the availability of quality cheater plugs. My posting to which you refer was in response to Carl109 trying to educate me.

I don't agree that Mr. Whitlock is not ignoring the points that I have made, but it is, of course, your life as it is mine. I think the odds of anything happening within a component that does not cause the breaker to trip and for anyone to touch the unit and provide a ground, is considerable lower than driving your car to work and having a fatal accident. I never said anything about "without risk", you did.

Thank you for the insincere wishes of good luck.

Albert, I did float the preamp also tonight just to see if there was further improvement. You are right. The dynamics, clarity, and ambient information are further improved. In the past, I had done all of this and also minimized ac volt leakage with the orientation of the ac plug. But this time the impact seems far greater.
I am thinking about trying one of these diode devices. Until the voltage on the ground get up to nearly one volt, there is no ground.

http://www.ebtechaudio.com/humxdes.html