Why Power Cables Affect Sound

I just bought a new CD player and was underwhelmed with it compared to my cheaper, lower quality CD player. That’s when it hit me that my cheaper CD player is using an upgraded power cable. When I put an upgraded power cable on my new CD player, the sound was instantly transformed: the treble was tamed, the music was more dynamic and lifelike, and overall more musical. 

This got me thinking as to how in the world a power cable can affect sound. I want to hear all of your ideas. Here’s one of my ideas:

I have heard from many sources that a good power cable is made of multiple gauge conductors from large gauge to small gauge. The electrons in a power cable are like a train with each electron acting as a train car. When a treble note is played, for example, the small gauge wires can react quickly because that “train” has much less mass than a large gauge conductor. If you only had one large gauge conductor, you would need to accelerate a very large train for a small, quick treble note, and this leads to poor dynamics. A similar analogy might be water in a pipe. A small pipe can react much quicker to higher frequencies than a large pipe due to the decreased mass/momentum of the water in the pipe. 

That’s one of my ideas. Now I want to hear your thoughts and have a general discussion of why power cables matter. 

If you don’t think power cables matter at all, please refrain from derailing the conversation with antagonism. There a time and place for that but not in this thread please. 

 Don`t let me ruin the discussion for you folks, but have any of you ever tryed out solid core powercables? (ca 12awg) This might open your ears/eyes a bit (or simply be shocking)

Single strand? I haven’t. My power cables use solid core but with multiple runs of different gauges. I’ve heard people say that large gauge power cable are more bass heavy and small gauge more treble heavy and that the best results come from a power cable that uses multiple gauges. What can you tell us about 12 gauge solid core power cables? Do you get good results?
On another note, I recently bought some adapters and put a high quality power cable upstream of the wall wart power supply that serves my DAC. Wow! The improvement in sound was very impressive. Much more slam and dynamics. I recommend anyone to try this if they are plugging their wall wart start into the outlet. 
“...plugging their wall wart DIRECTLY into the outlet.”

The adapter goes from IEC to a standard NEMA electrical outlet style plug.

I’m just generally curious what is going on scientifically speaking. Furthermore, once we understand the phenomena then we can design and tweak to produce the results we want. For example, maybe the gauge of the copper fully explains the effect. If that’s the case then we can tweak that one variable and ignore the other ones that could use up our time and money.

Its easiest to measure the effect the cord has on equipment with which its used.

I’ve seen a power cord make a difference of nearly 30% of output power out of a power amplifier. I could also see that that was caused by a voltage drop across the power cord. This stuff isn’t woo voodoo nor is it any rocket science, its just Ohm’s Law.

You can measure differences in output power, output impedance and distortion on many power amps just by changing the power cord- and many of these differences are simply caused by voltage drop. IMO tube amps are more susceptible as they have a filament circuit that is unregulated, and the heat of the cathode makes a difference as to the transconductance of the tube. But a class A transistor amp is likely pretty susceptible too.

There is more to it than voltage drop though. It also has to do with bandwidth of the power cord as it has to be able to provide current at high frequencies because rectifiers in power supplies often commutate (switch on and off) for very short periods of time, and if the current gets limited during that current pulse the power supply can’t charge completely. A noisy, improperly charged power supply can have an effect on how a circuit performs. So it should be no surprise that power cords can have an audible effect.

The usual saw is why doesn’t the wiring in the house make a difference and the answer is that it does. Romex in general though is pretty high performance compared to flexible cable but its illegal to make power cords out of it.