I run my MMGs with a 35 watt PrimaLuna and reach satisfying loudness levels. I don't see where a 88.5db speaker would have a problem with the PrimaLuna.
Will a tube amp work well on Revel f208?
Hi,
Two different stereo store salesmen both told me to use a tube integrated amp (primaluna evo 400, or Ayon V) on my Revel f208. I live in an apartment, so I rarely listen at concert levels (rock,pop,80's,modern music,etc) , But due to that speaker's impedance swings, it's in the 4 ohm region a lot and needs a 4 ohm capable amp. I was told by someone else that the Revel f208 likes high current, (Which won't be found in a tube amp?). I was considering something like Hegel or anthem integrated STR before the prima Luna evo 400 was recommended. Can Somebody with actual knowledge chime in so I am not at the mercy of salesman or misinformation? The speakers are revel f208 and I'd like to stick with an integrated and stream for simplicity (I have node 2i)Thanks!
Two different stereo store salesmen both told me to use a tube integrated amp (primaluna evo 400, or Ayon V) on my Revel f208. I live in an apartment, so I rarely listen at concert levels (rock,pop,80's,modern music,etc) , But due to that speaker's impedance swings, it's in the 4 ohm region a lot and needs a 4 ohm capable amp. I was told by someone else that the Revel f208 likes high current, (Which won't be found in a tube amp?). I was considering something like Hegel or anthem integrated STR before the prima Luna evo 400 was recommended. Can Somebody with actual knowledge chime in so I am not at the mercy of salesman or misinformation? The speakers are revel f208 and I'd like to stick with an integrated and stream for simplicity (I have node 2i)Thanks!
- ...
- 29 posts total
Labguy, The attached is an excellent explanation about tube gear and speaker matching. He explains it far better than I can. A tube/speaker mismatch is a classic mistake that you want to avoid, it’s expensive and frustrating. I don’t know how your speaker and amp will perform together, but it’s important to understand the issues involved and what to listen for before you purchase. Good luck and let is know what you decide. https://www.dhtrob.com/overige/tubefriendly_lsp_en.php |
I know this is an old thread but I’ll just say that I have a pair of (updated) Dynaco MK III monoblocks and they sound great with the F208s. Do they get super loud? No. But loud enough for me. 90db or so at least. Are they as crystal clear as my Buckeye amp? No. But they have a lovely vintage sound and surprisingly good bass control. |
- 29 posts total