Modification that has proved to be transformative


in a manner well beyond swapping out gear, tweaks, wire and the like. Ok Agoners I have owned and gone through lots of great gear as evidenced by my feedback:-)

However, over the past year I have learned something I want to share. Some of you will know all about this and others will have heard about it, but with doubts. Three words....

Duelund CAST capacitors

Sure, I have cap rolled and part rolled for a few years now. Fun stuff to do and sometimes I liked the change and other times not so much. However these CAST capacitors are an entirely different animal. I placed them in my tube preamp, hybrid amp and speakers. In each component the improvement was dramatic and a game changer in many ways. Universally, each component was greatly improved by a percentage easily exceeding 25 -30%. I can't understand why gear retailing for $10,000 or much more would skimp on a crossover or coupling cap. My hybrid amp used $30-$50 caps that sounded good, but not great. Same thing in my speakers for the midrange crossover caps. The Duelund CAST caps made these high dollar pieces sound the best they are capable of.

I picked these up at Parts Connextion at a great sale price recently. They are very expensive caps, but made more affordable due to the recent sale.
I cannot overstate how superior these are to all other boutique type caps often talked about in audio threads. This, at least in my experience, has been the case in my cap rolling endeavors. I say confidently they will greatly improve any component they are used in. No need to debate about synergy and the builders tuning with parts etc...as these CAST caps are just going to make good and great sounding gear much greater!

So if you have gear utilizing coupling caps in key circuit positions this is an upgrade that will deliver far more then their high cost. Spend your thousands here before any wire change or buying and selling gear. If your gear is of very high quality and the key circuit caps are good, but not Duelund CAST, consider a cap upgrade.

I purchased two .47 uf caps for $398 and four .22 uf caps for $800. I used these in my tube pre and hybrid amp. This is easily the best $1200 I have spent in my 30 plus years in audio. As much as wire and certain tweaks do improve the sound, these caps did even more. Other highly touted caps did not garner quite this reaction from me in my system.

Now, these caps would have cost me double this if not on sale. However, they would still have qualified as a best buy in terms of their impact on my music.
128x128grannyring
Grannyring,
I was able to get CAST capacitor dimensions from Duelund site via email(finally!).26mm x 163mm round shape.I thought they changed to a rectangle chassis last year. Are yours round or a rectangle? Seems the rectangle would be a better fit in my crossover if available.What type of adhesive do you use to hold them in place?
Thanks,
I just learned that the new rectangle chassis is only for special order 'smaller' value capacitors. For me it looks like I`ll have to use the moonpie(round) chassis instead.
163mm diameter = 6.5" fairly large, height is 26mm.
Regards,
Charles1dad, how do you access the crossover on your TE? I have the same speakers and this has thread has inspired me to contemplate changing out the caps in my speakers.
Hi Brf,
You just remove the lower 10" woofer. There`s actually a fair amount of space at the crossover site.Certainly enough to place the Duelund VSF caps and possibly even the larger and round CAST copper caps also.

All these years and I did`nt know the crossosver was so very simple with minimal parts,single cap and an inductor. I know what you mean Bfr. If this speaker sounds this good with the Auricap(considered a good cap) then in theory(anyway) it should improve if the Duelund is as superior as many claim it is.Grannyring really got my attention on this one.
Regards,
Round is what I am used to. In terms of mounting I have used these with quality zip ties. You could put five or six of them down in an + pattern and secure with zip ties North/south and East/West.

http://www.lowes.com/ProductDisplay?partNumber=292685-1781-45-1MBUVL&langId=

You can also hot glue right to the speaker. I like the first method the most if you can get your hands in there.

You can also use the first method above and attach to a thin plank of wood first. The 1/4 inch plank could then be glued to the inside of the speaker.