Primaluna & Klipsch Cornwall frustration HELP


Well this is a little frustrating. I have a Primaluna preamp and Primaluna Dialogue 5 power amp. Found a great deal on some Klipsch Cornwalls. Heard Klipsch and tubes were made for each other. Hooked them up and it had very little bass. I was expecting a BIG sound. Sounded almost anemic. Hooked them up to a class D audio amp through the Primaluna preamp and it was fantastic. Lots of slam. A great rock and roll sound. These are very efficient speakers so I don't get why they don't sound good through the tubes. 42 watts per channel at 8 ohms. Happened to talk to a Primaluna guy and he told me I needed a more powerful Primaluna amp. That has got to be BS. Do I have bad or weak tubes?? These are KT88's! Maybe they are going out. Who knows. Tried to call Kevin Deal at Upscale but he is out of town. I am not buying a bigger Primaluna amp. Kind of offended that I was even told that. Would the KT120's make a difference? Could it be something else wrong with the amp. Thanks for any help. By the way the amp sounds sweet with small monitors where I don't expect much bass. Thanks for any direction.
128x128dylanfan
In the corners. Through other power amps with the same preamp they sound great. It has got to be the Primsluna power amp.
Have you tried running them off the 4 ohm taps? What power tubes are you using? Both could have a great affect on the bass. You don't need more power and the Primaluna has plenty of bass output. As Brf indicated set up could be a major issue, if not the only one, and that is a good place to start.
It's possible that the original owner of the speakers replaced the Eminence K-33-E's or CTS K-33-P's(depending on the system's year of manufacture), with lower efficiency 15" woofers.
KT88's came in it. It was an open box. In perfect shape. I am thinking I have bad tubes. Should I try the Kt120's or stick with different Kt88's or some other tube.
A bit of clarification the first time you hooked the Primaluna amp up was with these speakers? Do you have another pair of speakers for comparison? And as someone mentioned above did you try the 4 ohm tap on your amp? Assuming it has one of course?