Hi Sherod!
FYI, these two caps are not really equivalent. The Audyn is VERY physically large and very expensive for the uF. Also the largest Audyn TC cap is around 2.2uF. For these three reasons it’s much more useful as a bypass cap.
In my case I’m using around 4.7uF and 12uF on my tweeter.
So for instance, if I used 10x 1.2uF Audyn it would cost around $48 x 10 = $480, while Clarity CMR for 1 x 12uF is $130. So Audyn is about 3x more expensive, very much in the range of Jupiter Cu Foil and Duelund equivalents.
As you may have read, I’ve tested MR + 0.1uF Audyn TC and it was a very good improvement with the larger cap only.
Right now, the CMR is beating this combination, by a tiny bit.
Next week or so I’ll be able to tell you if the CMR is worth bypassing as well.
Best,
E
FYI, these two caps are not really equivalent. The Audyn is VERY physically large and very expensive for the uF. Also the largest Audyn TC cap is around 2.2uF. For these three reasons it’s much more useful as a bypass cap.
In my case I’m using around 4.7uF and 12uF on my tweeter.
So for instance, if I used 10x 1.2uF Audyn it would cost around $48 x 10 = $480, while Clarity CMR for 1 x 12uF is $130. So Audyn is about 3x more expensive, very much in the range of Jupiter Cu Foil and Duelund equivalents.
As you may have read, I’ve tested MR + 0.1uF Audyn TC and it was a very good improvement with the larger cap only.
Right now, the CMR is beating this combination, by a tiny bit.
Next week or so I’ll be able to tell you if the CMR is worth bypassing as well.
Best,
E