What Class D amps will drive a 2 ohm load


Just asking.

I see specs into 4 ohms but nothing into difficult speaker loads (like Thiel CS5's).

Thanks for listening, 

Dsper


dsper
I have seen some commercial speakers from Focal introduce a 2 Ohm low deliberately in the crossover. Took quite a number of caps and resistors too.


My guess is that amps with low impedance around 100-150 Hz sound more discerning, more snobbish of amplifiers. "Look at me, I can only be driven by high current amps, so I must be better."


I have also seen designs from Infinity which were an utter part crap fest. My guess for them is that at the time they were designed good simulation and measurement tools were far too expensive, and they reached their sound empirically with no concern for the amps. You may think "well, nothing wrong with voicing by ear" but the designs I’m talking about could easily have achieved equivalent results with easier to drive impedances.


Kudos to Joseph Audio for going the other way, and actually adding crossover components which make them easier to drive by a wider range of amps.

Best,
E
I have a Classe Class D Sigma Amp 2 driving Wilson's which I am told dip down to 2 ohms. They sound GREAT.
Not saying they don't, but if you have Wilsons that go to 2ohms (your not saying what ones) then your not hearing them at the their best. And you maybe happy with that, because you don't know better.

Cheers George
Kudos to Joseph Audio for going the other way, and actually adding crossover components

That’s just adding series resistance to the perceived load to make it look higher to the amps output stage so it doesn’t complain, and what that does is lower the damping factor and raise the output impedance as seen by the amp 

You get a similar effect by using a ZERO output transformer with amps that aren’t right, and we all know know that is just a band aid fix, better off having the right amp to start with.
what about jeff rowland’s class d amps ?
all from the old stereo 102 through to the 201/501 monos and up to the current 825/925 etc can double their power into 4 ohms.
i’ve heard the big ones behind speakers like magnepans, martin logans and apogees, so they should have no problem driving the thiels.
Now your twisting things by saying "useless".
Of course it will "work" and he will say so, but will it get the very best out of the speakers?, DEFINITELY NOT! especially in the bass where they are a pig of a load.

George, once again you post with a hostility that is uncalled for. There was nothing "twisted" about what I said. It was fair use of English language. The provocative language you use does not reflect well on you or your credibility. If you are so sure of the view you state, why don’t you let Nord (and others) know they are wrong? That’s a rhetorical question.