Thanks Georgehifi
DIY speaker isolation base for a wood floor
A definite sonic improvement in tightening up the bass.
1. Start with 4 aluminum cones. I used some old Mod Squad Tip Toes.
2. 16x16 slab of granite.
3. 1/8 cork.
4. 1/2 inch neoprene rubber.
5. 1/8 cork.
6. Top with another 16x16 slab of granite.
7. Enclosed with a wood cradle to hide the mechanism.
The granite is from scraps from a shop and was cheap. The added 1/4 inch of neoprene to 1/2 inch thickness did help. Let me hear your thoughts.
1. Start with 4 aluminum cones. I used some old Mod Squad Tip Toes.
2. 16x16 slab of granite.
3. 1/8 cork.
4. 1/2 inch neoprene rubber.
5. 1/8 cork.
6. Top with another 16x16 slab of granite.
7. Enclosed with a wood cradle to hide the mechanism.
The granite is from scraps from a shop and was cheap. The added 1/4 inch of neoprene to 1/2 inch thickness did help. Let me hear your thoughts.
- ...
- 173 posts total
| Post removed |
blueranger OP So, sorbethane (sic) in place of cones or springs to couple to floor.? If I had sone extra funds I’d play around with both. >>>>>Sorbothane is a shock absorber. That’s why they use it in shoes. It’s not an isolator. You’re not trying to isolate yourself. Hel-loo! |
- 173 posts total