2. digital
  3. 183860-148959

With I2S how much does the streamer hardware matter?

I just received a Pi 2 Design Mercury V2 streamer and have for the first time an I2S connection to my R2R DACs. It sounds really good thru my Aries 12th into Woo Audio WA22 headphone system.

Can anyone tell me if there is any real advantage in keeping a ($5k) Lumin U1 for my main stereo system (into Denafrips Venus II and tube integrated) with its USB out versus another Mercury streamer with I2S connection with the benefits that connection provides re no buffer and separate clock signal?

Do the quality/type of internal processors matter as well or not really when going I2S? Of course there are limitations on whether they can handle certain formats like DSD but for actual sound quality of a particular format is there any difference?

I know - let my ears tell me - but was interested in any technical opinions as well.

calieng
soix
9,456 posts
 

Yes the streamer matters.  I’d keep the Lumin and add a DDC like the Denafrips Iris, Musician Pisces, etc. that will allow you to use the i2S input on your DAC.  Another Pontus ll owner here added the Iris and realized significant improvements in sound quality.  Hope this helps, and best of luck. 

jjss49's avatar
Ag insider logo xs@2x
jjss49
6,612 posts
 

i2s is but a connection type for digital music data... what goes through the connection still matters... so why would a good or bad streamer up front matter any less or more?

and yes -- of course, the proof is in the listening, always...

sfgak
114 posts
 

@calieng I also own a Denafrips DAC (Pontus II) and an Iris DDC, and recently bought a Mercury V2 Streamer. I was similarly impressed. The two streaming paths I compared were:

  1. Roon -(ethernet)-> RPI4 -(USB)-> Iris -(I2S)-> Pontus
    and;
  2. Roon -(ethernet)-> Mercury -(I2S)-> Pontus
    NOTE:  I have not tried anything like:
  3. Roon -(ethernet)-> Lumin -(USB)-> Iris -(I2S)-> Pontus

I can say that, similar to your situation, I thought there was a noticeable improvement going from #1 to #2. I found the Mercury's low end sonics were similar to the RPI4 -- perhaps with slightly more defined attack; but there was a noticeable difference in the high end, particularly the attack / decay on percussion such as sticks, as well as better low level detail in woodwind instruments, faint cymbal swells, and other sounds with high-frequency components. Everything just sounded better, cleaner. 

Why? I suspect it is because USB in isochronous mode (which is used for audio transport) is a somewhat unpredictable transport (e.g., there are a lot of complicated calculations going on with the EHCI -- Enhanced Host Controller Interface -- which depend on the operating system, among other things, not just the hardware). On the other hand, I2S uses the system clock -- pretty much a direct connection to a crystal oscillator. Because of this, I think the direct to I2S configuration of the Mercury, delivers almost all, if not all, sound data without any timing problems; this precision most likely leads to the increased sonic resolution.

It's easy to believe a DDC can reclock a signal more accurately (assuming its oscillator is higher quality), provided that no packets are lost in transit to the DDC. However, the USB protocol makes that guarantee of no lost packets difficult to achieve. If packets are lost or late, the DDC can't help.

Can something like the Lumin connected to the Iris sound better? It's possible the Lumin has a great USB interface, although I suspect that, like most manufacturers, they are buying the operating system from elsewhere (or using Linux for free). Perhaps you can try the Lumin through the Iris and let us know...

More to discover