Swap the phono leads on your PS Audio phono to make sure the sound level issue reverses (to rule out an issue with the amp.)
EDIT: ^ Elliott got there before me!
Cartridge - sweet spot on the cost/sound curve?
I think my Sumiko Blue point 2 is going. Right channel is lower sound level than right using my turntable, totally even using digital. Table is Project RPM 5 carbon that I bought as a store demo with the blue point 2 so no telling how many hrs on it.
The rest of the system is a PS audio GCPH phono pre, deHaviland Ultraverve 3, McCormack DNA 1, Martin Logan SL3s with new panels.
I loved the warmth and focus of the blue point but am a bit back by how much they cost $500. Don’t laugh I know carts can cost thousands but I got a kid in college!
Any recommendations for something at or under that price point that is better?
- ...
- 20 posts total
If your phono stage can handle low output moving coil cartridges a Denon DL 310 MK II can be had from a trusted seller 2Juki for $330. If higher output is needed then the Denon DL110 is in the low 200's. Output voltage is higher, but not as high as a typical moving magnet. You MIGHT have to add a bit of volume from where your typical volume setting was for the Sumiko cartridge, but it will work. These are the two most affordable moving coil cartridges I am aware of. Otherwise you are looking at moving magnets, typically the Audio Technica AT95 family, or the 540ml which costs in the mid to high $200's. |
@elliottbnewcombjr In the sub $500 new cartridge market I am interested in knowing what options there are for boron or other hybrid cantilevers. For awhile there was carbon fiber but that was more of a cheap as chips option for Audio Technica. |
- 20 posts total