2. analog
  3. 1182836545

Static on Vinyl

Here is my greif...............

I am getting some major static electricity every time
I remove an LP from my Turntable platter.

Here is my setup:

The platter is a Teres coccabolo (hardwood)
& I get the static with or without using my Herbies way excellent turntable mat.

I installed a grounding conductor screwed to the brass
platter spindle & grounded it to the tubed preamp & no
change.

I also use a Mapleshade Ionoclast static buster on the vinyl just before dropping the stylus, & still the bloody
static is their when I pull the vinyl from the platter
after the LP has gone thru the grooves.

any thoughts? ? ? ? ?
socoaste
stltrains
845 posts
 
I received a kenetronics model sw141 with the ground wire on monday, and this brush works fantastic. It doesnt just push the dust around the lp. This brush picks dust up.
2002ss335
84 posts
 
I was having the same problem with my Oracle and ended up running a ground to the outlet from my preamp. That seems to have cured the problem.
gaslover
48 posts
 
Simply hold the lp on edge, against the inside of your hand and chest. With your free hand, tap the label area several times (sharply - like you mean business), then proceed to play the record. You will enjoy a static-free performance every time.
rccc
216 posts
 
PERMOSTAT
gritingrooves
22 posts
 
A Nitty Gritty record cleaner may help. The way it works is you liberally apply a cleaner/distilled water mix to the surface of the record with a brush.

Then, you rotate the record with the vacuum running to pull off the liquid and dirt. If you do this to both sides before you play, the record may be less dry and less prone to holding static.
More to discover