Cardas Burn-In LP


Hi:
I received my Cardas Burn-In LP today. I'm using a new rig, for me at least. LP12 (10 years old), new RB-1000 arm and Rega Exact 2 cart. I've been playing with the various sweeps on the LP and they do what they should. I read through the other uses for the LP and saw that the 1/2" wide blank (no grooves) sections on side 2 can be used to check tonearm balance and settings. It says the arm should track slowly toward the center. Well mine races across these areas and actually jumps a few grooves into the next section. My table (particularly the path of the arm) is dead level so I'm questioning the set-up of the arm. My dealer set it up, as I have NO experience with this stuff.

Is this a serious thing that should be addressed? If so what do I ask my dealer to check?

Thanks!
arch7
I have the Cardas Sweep as well and would agree that the blanks are certainly not the be-all/end-all in setting anti-skate. That being said, in my setup the arm moves very, very slowly in the "outer" blank and hardly at all in the inner blank closest to the label. If yours is literally shooting across the blanks and skipping towards the label I would think you might try increasing anti-skate, not decreasing it.

Ultimately, though, you want to set by ear. There are some great posts in the archives here from Doug Deacon with respect to setting anti skate by ear-do a search for those.

Finally, if you don't have a digital stylus force gauage or protractor, invest in a cheap one (they need not be expensive). Even though a dealer has set it up, things can get out of wack, particularly if you've transported the table home from the dealer's after setup. You have a nice table/arm/cartridge and proper alignment/VTA and antiskate are critical to realizing its potential. There is a ton of good info easily available here and at vinylasylum that you can quickly pick up on to get things in order yourself.
While we're on the topic of the Cardas LP, I was wondering if there was anywhere on the web which gave better descriptions of what each track on either side of the LP does, and what they can-should be used for?

I know there are some descriptions on the Jacket, but a better analysis would certainly help guys like me better understand.

I also have an older Cardas LP, circa 1996, which has the same stuff on both sides, and the LP came with nothing so to speak for description of tracks other than the obvious. Thanks, Mark