If the arm is fixed and you like it why bother?
Linn Basik LVX vs. Rega RB 303
Hi, Folks,
I have a very old Linn Basik LVX on my SOTA Sapphire. When I say "very old," I mean that I bought it used from the dealer back in 1986! :-)
I was having hum/buzz issues on my analogue side, and finally isolated it down to the turntable. It turned out to be a shorted tonearm ground wire along with some mechanical elements of the arm that needed tightening. All this was done by Mike at Austin Stereo, a great, local repair shop.
Now the hum is gone and the arm is sounding fine but the whole exercise has me wondering whether I might want to upgrade the old arm. My budget is modest so the Rega RB 303 at $600 sounds about right. By the way, my cart is an Ortofon 2M Blue.
Would this be a worthwhile (i.e., discernible) step up?
Thanks for your opinions!
I have a very old Linn Basik LVX on my SOTA Sapphire. When I say "very old," I mean that I bought it used from the dealer back in 1986! :-)
I was having hum/buzz issues on my analogue side, and finally isolated it down to the turntable. It turned out to be a shorted tonearm ground wire along with some mechanical elements of the arm that needed tightening. All this was done by Mike at Austin Stereo, a great, local repair shop.
Now the hum is gone and the arm is sounding fine but the whole exercise has me wondering whether I might want to upgrade the old arm. My budget is modest so the Rega RB 303 at $600 sounds about right. By the way, my cart is an Ortofon 2M Blue.
Would this be a worthwhile (i.e., discernible) step up?
Thanks for your opinions!
- ...
- 14 posts total
- 14 posts total