Why do I like Class AB better than Class A?


So I just purchased a Plinius SA 100 MKIII, and have had 2 listening sessions comparing both with the toggle switch. To me clearly the AB is more detailed and focused, the A is warm but a little fuzzy and bloated, although I would give it a slight nod on just vocal songs. Am I just not use to the sound as this is my first A amp or have I not let it properly warm up for class A (1hour or so).
Don't get me wrong, i love the amp, great bottom end slam but I don't hear the holy grail from Class A. Thanks in advance for the input guys.
barfbag
I'm sorry, maybe I'm slow or missing something. but your initial post said that you compared both with a toggle switch. Compared both what? I only saw one amp. So, my initial reaction without benefit of knowing which two amps you are talking about is that you compared apples to oranges. The amps were either not rated the same or they were in totally different price points. Like comparing a $10,000 amp with a $400 Yamaha 100wpc amp. I don't know what you compared.

Enjoy
Minorl,

you can flick a switch on the Plinius and change it between class A or class A/B, one amp offers both functions
Minor1, there are some amps out there that have a switch between high bias (Class A) and low bias (Class AB). The OP's Plinius SA-100 mk III is one such of these amps. Clayton Audio also had amps that used to do this. There may also be others that I'm not aware of. So you have the ability to switch between Class A operation and Class AB operation via a switch on the amplifier.

To answer your question: Compared both what?
He compared both forms of operation (A vs AB) that his amp is capable of. Yes, there are other forms of operation such as Class D, also.
marketing. I would bet you a lunch that the Plinius is biased class A up to a particular bias point and even within class A/B and when you flick the switch the bias is reset to a higher bias point.

enjoy
Got it. Still once you turn a transistor on, it is on. It can be turned on at a really low bias point, but, it is still on. Then you can really turn it on at a much higher bias point where you are cooking at full rated output without an input signal.

This is marketing and semantics. But on is on. Some devices are biased such that they aren't turned on until the AC signal is passed through it. Others are biased such that they are turned on with DC bias with or without an AC signal passing through it. Again, many of the amps I have tested and repaired state they are class A on the specifications and are rated at 50, 100 150,etc. wpc. This does not mean that they are biased at the rated output capacity. They are biased on at 2 watts or 5 watts of 20 watts etc.