ketchup
Responses from ketchup
Commercial air travel with a speaker I can't believe this hasn't been asked yet, but what kind of hifi speaker is 83 pounds and is not part of a stereo pair? | |
Looking for intermediate-step Streamer: better than BS Node and not @ Bartok level pricing OP - I replaced a BS Node with an Aurender N100SC and the Aurender completely destroys the Node in every respect. The same DAC (Border Patrol DAC SE) and cable (Oyaide DR510) were used with each streamer, so it was an apples to apples comparison. ... | |
EAT E-Glo Petit I had a very hard time removing the tubes from mine. The trick for me was to clean the top of the tubes with alcohol to remove any oils that might have been present and wear clean nitrile gloves. The increased grip due to the clean tubes and the... | |
Eminent Technology ET-2 Tonearm Owners @forrestc thanks for the info. I may have to pick up an aluminum goose neck, especially because it sounds like I might not need to go through with a cart alignment after installing it. I just finished up a painstaking alignment and don't want to... | |
Alpha Core Goertz @pops Thiels are a pain (I had a pair once). I would attach the Zobels to the amp end if using Thiels. @ozzy I soldered ring terminals to my Zobels to make attaching them a breeze. You could also use spades. Easy peasy. These don't have to be... | |
Alpha Core Goertz @ozzy - I have MI 3s and don’t think they have Zobels built in. I don’t think it’s even an option, but maybe the previous owner of yours had them custom made. Who knows. I tried Zobels on the bass side of my bi-amped system and noticed no differe... | |
Alpha Core Goertz This thread does not match my experience. I ordered a set of Zobels from them a year or two ago and it was no problem at all. | |
Flat copper speaker cables OP, you can buy some foil inductors, unwind them, and make cables out of the copper foil. You can also buy copper foil here: https://www.hificollective.co.uk/wire/mundorf-copper-foil.html | |
Turntable dust cover cleaning Novus #1 is great. It's supposed to have antistatic properties, so it may work for you. If the cover is scratched, try #2 or #3 and then #1. | |
Duelund conversion to DIY Helix Geometry Cabling Oops, sorry. I totally missed that you were looking for bare. | |
Duelund conversion to DIY Helix Geometry Cabling I see 14, 16, and 12 Neotech at Parts Connexion. | |
Discuss The Viv Lab Rigid Arm @lewm Maybe this indicates that zero tracking angle error is not the Holy Grail some claim it to be. That's the designer's whole point, right? You have to wonder how many people here who are poo-poo'ing the Viv arm have permanent tracking er... | |
LP Thickness/Taper Just measured another one for fun This was a 158 gram Hickory. The thickness of the grooved portion ranged from 0.053" at the beginning of the first track to 0.063" at the end of the last track. This means that the top surface of the LP will be at... | |
LP Thickness/Taper @lewm Since the angle of incline appears to be constant from outer to inner grooves, seems to me if you set azimuth correctly at any point on the LP surface, there would be no problem related to a changing azimuth angle. You are exactly right. | |
LP Thickness/Taper @theo I find your picture interesting in that the outer rim is not resting on the turntable platter. Many turntable platters are designed like that because the outer rim of the record is much thicker than the grooved portion. By hanging the ... |